ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
NC7SZ373P6
Tingnan ang Detalye DataSheets

NC7SZ373P6

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Shifter
  • Characteristics: Low-voltage, high-speed, single-bit, transparent latch
  • Package: 6-pin SOT-23 package
  • Essence: The NC7SZ373P6 is a logic level shifter IC that allows for bidirectional voltage translation between low-voltage and high-voltage systems.
  • Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Logic Voltage Levels: 1.8V to 5V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 2.5ns (typical)
  • Input Capacitance: 3pF (typical)
  • Output Capacitance: 4pF (typical)

Detailed Pin Configuration

The NC7SZ373P6 has the following pin configuration:

____ 1 |o | 6| VCC 2 | | 5| GND 3 | | 4| A ----

  1. Pin 1: Data Input/Output (A)
  2. Pin 2: Ground (GND)
  3. Pin 3: Not Connected (NC)
  4. Pin 4: Data Input/Output (A)
  5. Pin 5: Ground (GND)
  6. Pin 6: Power Supply (VCC)

Functional Features

  • Bidirectional voltage translation between low-voltage and high-voltage systems.
  • Transparent latch functionality allows for continuous data flow.
  • High-speed operation with low propagation delay.
  • Wide operating voltage range for compatibility with various systems.
  • Low input and output capacitance for efficient signal transmission.

Advantages and Disadvantages

Advantages: - Enables seamless communication between low-voltage and high-voltage devices. - Compact SOT-23 package allows for space-saving integration. - High-speed operation ensures minimal signal delay. - Wide operating voltage range provides flexibility in system design.

Disadvantages: - Limited to single-bit data transmission. - Not suitable for applications requiring multi-bit data translation. - May require additional components for level shifting in complex systems.

Working Principles

The NC7SZ373P6 utilizes a combination of MOSFETs and logic gates to achieve bidirectional voltage translation. When the input voltage is within the specified logic voltage levels, the IC acts as a transparent latch, allowing the data to pass through without any level shifting. If the input voltage exceeds the logic voltage levels, the IC performs the necessary level shifting to ensure proper communication between the low-voltage and high-voltage systems.

Detailed Application Field Plans

The NC7SZ373P6 is commonly used in various applications where voltage translation is required, such as:

  1. Battery-powered devices that interface with higher voltage peripherals.
  2. Communication systems involving different voltage domains.
  3. Industrial control systems with mixed voltage levels.
  4. Consumer electronics for level shifting between microcontrollers and sensors.
  5. IoT devices requiring bidirectional communication between low-power and high-power components.

Detailed and Complete Alternative Models

  1. SN74LVC1T45: Single-bit dual-supply voltage level translator.
  2. TXB0108: 8-bit bidirectional voltage-level translator.
  3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator.
  4. CD40109B: Quad bilateral switches with level translation.
  5. TXS0108EPWR: 8-bit bidirectional voltage-level translator with automatic direction sensing.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 511 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NC7SZ373P6 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of NC7SZ373P6 in technical solutions:

  1. Q: What is NC7SZ373P6? A: NC7SZ373P6 is a single D-type transparent latch with 3-state outputs, which can be used for data storage and signal buffering in various electronic circuits.

  2. Q: What is the operating voltage range of NC7SZ373P6? A: The operating voltage range of NC7SZ373P6 is typically between 1.65V and 5.5V.

  3. Q: Can NC7SZ373P6 handle high-speed data signals? A: Yes, NC7SZ373P6 is designed to handle high-speed data signals with a maximum propagation delay of around 4 ns.

  4. Q: How many latch outputs does NC7SZ373P6 have? A: NC7SZ373P6 has 8 latch outputs, each capable of driving up to 32 mA.

  5. Q: Is NC7SZ373P6 compatible with other logic families? A: Yes, NC7SZ373P6 is compatible with a wide range of logic families, including TTL, CMOS, and LVCMOS.

  6. Q: Can NC7SZ373P6 be used in battery-powered applications? A: Yes, NC7SZ373P6 is suitable for battery-powered applications due to its low power consumption and wide operating voltage range.

  7. Q: Does NC7SZ373P6 support bidirectional data flow? A: No, NC7SZ373P6 is a unidirectional latch and does not support bidirectional data flow.

  8. Q: What is the package type of NC7SZ373P6? A: NC7SZ373P6 is available in a small SOT-23-6 package, which is compact and suitable for space-constrained designs.

  9. Q: Can NC7SZ373P6 be used in high-temperature environments? A: Yes, NC7SZ373P6 has a wide operating temperature range of -40°C to 125°C, making it suitable for high-temperature applications.

  10. Q: Are there any specific application notes or reference designs available for NC7SZ373P6? A: Yes, the manufacturer provides application notes and reference designs that can help users understand and implement NC7SZ373P6 in their technical solutions effectively.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.