ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
NCP1014APL065R2G
Tingnan ang Detalye DataSheets

NCP1014APL065R2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High voltage switcher, low power consumption
  • Package: TO-220-6L
  • Essence: Switching Regulator Controller
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7.5V to 450V
  • Output Voltage Range: 5V to 20V
  • Maximum Output Current: 100mA
  • Operating Temperature Range: -40°C to +125°C
  • Frequency Range: 50kHz to 300kHz
  • Duty Cycle Range: 0% to 100%
  • Standby Power Consumption: <1mW

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. CS: Current sense pin for current limit protection
  6. DRAIN: Switching transistor drain connection

Functional Features

  • High voltage startup capability
  • Internal leading-edge blanking
  • Pulse-by-pulse current limiting
  • Overvoltage protection
  • Undervoltage lockout
  • Soft-start function
  • Frequency jittering for reduced EMI

Advantages

  • Wide input voltage range allows for versatile applications
  • Low power consumption enhances energy efficiency
  • Integrated protection features ensure system reliability
  • Soft-start function prevents inrush current during startup
  • Frequency jittering reduces electromagnetic interference (EMI)

Disadvantages

  • Limited maximum output current may restrict certain applications
  • Requires external components for complete power management solution

Working Principles

The NCP1014APL065R2G is a switching regulator controller IC designed for power management applications. It operates by regulating the output voltage through a feedback mechanism. The IC uses pulse-width modulation (PWM) to control the duty cycle of the switching transistor, which in turn regulates the output voltage. The internal circuitry provides various protection features such as overvoltage protection and current limiting to ensure safe operation.

Detailed Application Field Plans

The NCP1014APL065R2G is commonly used in various power management applications, including: - AC-DC power supplies - LED lighting systems - Industrial controls - Consumer electronics

Detailed and Complete Alternative Models

  1. NCP1014AP065R2G: Similar to NCP1014APL065R2G but with a different package (PDIP-7)
  2. NCP1014BP065R2G: Higher maximum output current (200mA) variant
  3. NCP1014DP065R2G: Lower standby power consumption (<0.5mW) variant

(Note: These alternative models are provided for reference and may have slight differences in specifications and pin configuration.)

Word count: 311 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NCP1014APL065R2G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of NCP1014APL065R2G in technical solutions:

  1. Q: What is NCP1014APL065R2G? A: NCP1014APL065R2G is a power management IC (PMIC) designed for offline flyback converters used in various technical solutions.

  2. Q: What is the input voltage range of NCP1014APL065R2G? A: The input voltage range of NCP1014APL065R2G is typically between 85V and 265V AC.

  3. Q: What is the output power capability of NCP1014APL065R2G? A: NCP1014APL065R2G can handle output power up to 6.5W.

  4. Q: Can NCP1014APL065R2G be used in low-power applications? A: Yes, NCP1014APL065R2G is suitable for low-power applications due to its efficient power conversion capabilities.

  5. Q: Does NCP1014APL065R2G have built-in protection features? A: Yes, NCP1014APL065R2G includes various protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  6. Q: What is the switching frequency of NCP1014APL065R2G? A: The switching frequency of NCP1014APL065R2G is typically around 65kHz.

  7. Q: Can NCP1014APL065R2G operate in a wide temperature range? A: Yes, NCP1014APL065R2G has a wide operating temperature range of -40°C to 125°C.

  8. Q: Is NCP1014APL065R2G suitable for battery-powered applications? A: No, NCP1014APL065R2G is designed for offline applications and requires an AC input.

  9. Q: What are the typical applications of NCP1014APL065R2G? A: NCP1014APL065R2G is commonly used in LED lighting, home appliances, industrial control systems, and other similar applications.

  10. Q: Does NCP1014APL065R2G require external components for operation? A: Yes, NCP1014APL065R2G requires external components like resistors, capacitors, and an inductor to form a complete flyback converter circuit.

Please note that these answers are general and may vary depending on specific design considerations and requirements.