ON Semiconductor
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
NCP1071STCT3G
Tingnan ang Detalye DataSheets

NCP1071STCT3G

Product Overview

Category

NCP1071STCT3G belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

This product is primarily used in various power supply systems, including but not limited to switch-mode power supplies (SMPS), battery chargers, and LED drivers.

Characteristics

  • High efficiency: The NCP1071STCT3G offers excellent energy conversion efficiency, resulting in reduced power consumption and improved overall system performance.
  • Wide input voltage range: It can operate with a wide input voltage range, making it suitable for diverse power supply applications.
  • Low standby power consumption: The device features low standby power consumption, ensuring minimal power wastage during idle periods.
  • Protection features: NCP1071STCT3G incorporates several protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown, enhancing system reliability and safety.

Package

The NCP1071STCT3G is available in a compact surface-mount package, which facilitates easy integration into various circuit designs.

Essence

The essence of NCP1071STCT3G lies in its ability to efficiently regulate and control power supply systems, ensuring stable and reliable operation.

Packaging/Quantity

This product is typically supplied in tape and reel packaging, with a standard quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 25V
  • Output Voltage Range: 0.8V to 20V
  • Maximum Output Current: 1A
  • Switching Frequency: 65kHz to 100kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The NCP1071STCT3G features a 7-pin configuration:

  1. VCC: Power supply input pin.
  2. GND: Ground reference pin.
  3. FB: Feedback pin for regulating the output voltage.
  4. COMP: Compensation pin for stability control.
  5. CS: Current sense pin for current limit protection.
  6. SS: Soft-start pin for gradual power-up.
  7. HV: High-voltage pin for driving external MOSFET.

Functional Features

  • Constant voltage (CV) and constant current (CC) regulation modes.
  • Pulse frequency modulation (PFM) operation for improved efficiency during light load conditions.
  • Adjustable output voltage and current limits.
  • Overvoltage protection (OVP) and overcurrent protection (OCP) mechanisms.
  • Thermal shutdown protection to prevent device overheating.

Advantages and Disadvantages

Advantages

  • High energy conversion efficiency leads to reduced power consumption.
  • Wide input voltage range enables versatile application possibilities.
  • Compact package facilitates easy integration into circuit designs.
  • Multiple protection features enhance system reliability and safety.

Disadvantages

  • Limited maximum output current of 1A may not be suitable for high-power applications.
  • Requires external components for complete power supply implementation.

Working Principles

The NCP1071STCT3G operates based on a pulse width modulation (PWM) technique. It regulates the output voltage by adjusting the duty cycle of the internal power switch, which controls the energy transfer from the input to the output. The feedback mechanism continuously monitors the output voltage and adjusts the duty cycle accordingly to maintain a stable output.

Detailed Application Field Plans

The NCP1071STCT3G finds extensive application in various power management systems, including: - Switch-mode power supplies (SMPS) for computers, televisions, and other electronic devices. - Battery chargers for portable electronics, electric vehicles, and renewable energy systems. - LED drivers for lighting applications, such as streetlights, automotive lighting, and display backlighting.

Detailed and Complete Alternative Models

  • NCP1071ST50T3G: Similar to NCP1071STCT3G, but with a fixed output voltage of 5V.
  • NCP1071ST33T3G: Similar to NCP1071STCT3G, but with a fixed output voltage of 3.3V.
  • NCP1071ST15T3G: Similar to NCP1071STCT3G, but with a fixed output voltage of 1.5V.

These alternative models provide specific output voltage options for different application requirements while maintaining similar characteristics and functionality.

Word count: 607 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NCP1071STCT3G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of NCP1071STCT3G in technical solutions:

Q1: What is the NCP1071STCT3G? A1: The NCP1071STCT3G is a high-performance, fixed-frequency current-mode controller designed for offline flyback converters.

Q2: What are the key features of the NCP1071STCT3G? A2: The key features include integrated high-voltage startup, built-in frequency jittering for EMI reduction, adjustable overcurrent protection, and a wide input voltage range.

Q3: What is the typical application of the NCP1071STCT3G? A3: The NCP1071STCT3G is commonly used in power supply applications such as LED lighting, auxiliary power supplies, and standby power supplies.

Q4: What is the maximum operating frequency of the NCP1071STCT3G? A4: The maximum operating frequency of the NCP1071STCT3G is typically 100 kHz.

Q5: Can the NCP1071STCT3G operate with a wide input voltage range? A5: Yes, the NCP1071STCT3G can operate with an input voltage range from 7.5 V to 25 V.

Q6: Does the NCP1071STCT3G have built-in protection features? A6: Yes, the NCP1071STCT3G has built-in overvoltage protection, undervoltage lockout, and thermal shutdown protection.

Q7: How does the NCP1071STCT3G help reduce electromagnetic interference (EMI)? A7: The NCP1071STCT3G incorporates frequency jittering, which helps spread the energy of the switching waveform and reduces EMI emissions.

Q8: Can the NCP1071STCT3G be used in dimmable LED lighting applications? A8: Yes, the NCP1071STCT3G can be used in dimmable LED lighting applications by incorporating external circuitry for dimming control.

Q9: What is the maximum output power that can be achieved with the NCP1071STCT3G? A9: The maximum output power depends on the specific application and design considerations. It can range from a few watts to tens of watts.

Q10: Is there any reference design available for the NCP1071STCT3G? A10: Yes, ON Semiconductor provides reference designs and application notes that can help users implement the NCP1071STCT3G in their technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and application of the NCP1071STCT3G.