Power Integrations
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
LNK306DN-TL
Tingnan ang Detalye DataSheets

LNK306DN-TL

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Wide input voltage range - Over-temperature protection - Short-circuit protection

Package: DFN-8 (Dual Flat No-Lead)

Essence: LNK306DN-TL is a power management IC designed for low power applications. It provides efficient power conversion and protection features in a compact package.

Packaging/Quantity: The LNK306DN-TL is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Input Voltage Range: 85V to 265V AC
  • Output Voltage: 5V DC
  • Output Current: Up to 200mA
  • Operating Temperature Range: -40°C to +150°C
  • Efficiency: Up to 85%
  • Standby Power Consumption: Less than 100mW

Detailed Pin Configuration

The LNK306DN-TL has the following pin configuration:

  1. VDD: Power supply input
  2. BP/MODE: Feedback and control pin
  3. GND: Ground
  4. FB: Feedback pin
  5. NC: No connection
  6. Drain: Power switch drain
  7. Source: Power switch source
  8. VDD: Power supply input

Functional Features

  • Primary-side regulation (PSR) eliminates the need for an optocoupler or secondary-side feedback circuitry.
  • Auto-restart protection feature ensures continuous operation even in the event of a fault condition.
  • Frequency jittering reduces EMI emissions.
  • Built-in over-temperature and short-circuit protection enhance system safety and reliability.
  • Green-mode power-saving operation improves efficiency at light loads.

Advantages and Disadvantages

Advantages: - Compact size and low power consumption make it suitable for space-constrained and energy-efficient applications. - Primary-side regulation simplifies circuit design and reduces component count. - Integrated protection features enhance system reliability.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Requires careful consideration of thermal management due to the operating temperature range.

Working Principles

The LNK306DN-TL utilizes primary-side regulation (PSR) technology to achieve accurate voltage regulation without the need for an optocoupler or secondary-side feedback circuitry. It operates in a flyback topology, where the input voltage is converted to a regulated output voltage through a power switch and transformer. The feedback pin monitors the output voltage and adjusts the duty cycle of the power switch to maintain the desired output voltage.

Detailed Application Field Plans

The LNK306DN-TL is commonly used in various low-power applications, including but not limited to: - Power supplies for consumer electronics - LED lighting drivers - Standby power adapters - Home automation systems - Industrial control systems

Detailed and Complete Alternative Models

  1. LNK302DN-TL
  2. LNK304DN-TL
  3. LNK305DN-TL
  4. LNK307DN-TL

These alternative models offer similar functionality and characteristics to the LNK306DN-TL, providing flexibility in design choices based on specific application requirements.

In conclusion, the LNK306DN-TL is a power management IC that offers efficient power conversion, protection features, and primary-side regulation. Its compact size, low power consumption, and integrated functionalities make it suitable for various low-power applications. However, designers should consider its limited output current and thermal management requirements.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng LNK306DN-TL sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of LNK306DN-TL in technical solutions:

  1. Q: What is LNK306DN-TL? A: LNK306DN-TL is a highly integrated, energy-efficient offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK306DN-TL? A: LNK306DN-TL features include primary-side regulation, high-voltage startup, accurate constant current control, and built-in protection features.

  3. Q: What are the typical applications of LNK306DN-TL? A: LNK306DN-TL is commonly used in LED lighting, smart home devices, industrial controls, and other low-power applications.

  4. Q: How does LNK306DN-TL achieve primary-side regulation? A: LNK306DN-TL uses a proprietary algorithm called EcoSmart™ to regulate the output voltage directly from the primary side, eliminating the need for an optocoupler or secondary feedback circuitry.

  5. Q: Can LNK306DN-TL operate with universal input voltage? A: Yes, LNK306DN-TL can operate with a wide input voltage range of 85VAC to 265VAC, making it suitable for global applications.

  6. Q: Does LNK306DN-TL support dimming functionality? A: No, LNK306DN-TL does not have built-in dimming functionality. However, it can be combined with external components to enable dimming control.

  7. Q: What are the built-in protection features of LNK306DN-TL? A: LNK306DN-TL includes features like thermal shutdown, cycle-by-cycle current limit, output short-circuit protection, and input overvoltage protection.

  8. Q: Can LNK306DN-TL be used in high-temperature environments? A: Yes, LNK306DN-TL has a wide operating temperature range of -40°C to 150°C, allowing it to be used in various environmental conditions.

  9. Q: What is the typical efficiency of LNK306DN-TL? A: LNK306DN-TL offers high efficiency, typically above 85%, which helps reduce power consumption and heat dissipation.

  10. Q: Are there any reference designs available for LNK306DN-TL? A: Yes, Power Integrations provides reference designs and application notes that can help engineers implement LNK306DN-TL in their technical solutions.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.