Power Integrations
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
TNY285KG
Tingnan ang Detalye DataSheets

TNY285KG

Product Overview

Category

TNY285KG belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power supply applications.

Characteristics

  • TNY285KG is a highly efficient and compact device.
  • It offers excellent performance in terms of power conversion.
  • The IC is designed to provide reliable and stable power supply solutions.

Package

TNY285KG comes in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of TNY285KG lies in its ability to efficiently convert power while maintaining stability and reliability.

Packaging/Quantity

The IC is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of TNY285KG units.

Specifications

The following are the specifications of TNY285KG:

  • Input Voltage Range: 85V to 265V AC
  • Output Power: Up to 10W
  • Operating Frequency: 132 kHz
  • Maximum Duty Cycle: 75%
  • Standby Power Consumption: Less than 30 mW
  • Thermal Shutdown Protection: Yes
  • Overload Protection: Yes
  • Short Circuit Protection: Yes

Detailed Pin Configuration

TNY285KG has the following pin configuration:

  1. VDD - Power supply input
  2. BP/M - Bypass/Multifunction pin
  3. FB - Feedback pin
  4. GND - Ground
  5. D - Drain pin
  6. S - Source pin

Functional Features

TNY285KG offers the following functional features:

  • Integrated high-voltage power MOSFET
  • Auto-restart protection for fault conditions
  • Frequency jittering for reduced EMI emissions
  • Built-in line undervoltage lockout (UVLO)
  • Advanced hysteretic thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leading to reduced power consumption
  • Compact size for space-constrained applications
  • Comprehensive protection features ensure system reliability
  • Wide input voltage range allows for versatile usage

Disadvantages

  • Limited output power capability (up to 10W)
  • Not suitable for high-power applications

Working Principles

TNY285KG operates on the principle of switching power conversion. It utilizes a combination of high-frequency switching and control circuitry to efficiently convert the input voltage into a regulated output voltage.

The IC employs a flyback topology, where energy is stored in an inductor during the switch-on period and then transferred to the output during the switch-off period. This process enables efficient power transfer and regulation.

Detailed Application Field Plans

TNY285KG finds application in various fields, including:

  1. Consumer electronics: Power supplies for TVs, set-top boxes, and audio systems.
  2. Lighting: LED drivers, compact fluorescent lamp (CFL) ballasts.
  3. Industrial equipment: Power supplies for industrial automation, control systems, and motor drives.
  4. Home appliances: Power supplies for refrigerators, washing machines, and air conditioners.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to TNY285KG are:

  1. TNY284KG
  2. TNY286KG
  3. TNY287KG
  4. TNY288KG

These models belong to the same IC family and provide comparable performance characteristics.

In conclusion, TNY285KG is a highly efficient and compact integrated circuit used in power supply applications. Its key features include excellent power conversion performance, comprehensive protection mechanisms, and a wide input voltage range. While it has limitations in terms of output power, it offers significant advantages such as reduced power consumption and versatile usage. The IC operates on the principle of switching power conversion and finds application in consumer electronics, lighting, industrial equipment, and home appliances. Alternative models within the same IC family provide similar functionality.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TNY285KG sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of TNY285KG in technical solutions:

  1. Q: What is TNY285KG? A: TNY285KG is a specific model of power integrated circuit (IC) developed by Power Integrations.

  2. Q: What are the typical applications of TNY285KG? A: TNY285KG is commonly used in various low-power applications such as power supplies, adapters, chargers, and LED lighting.

  3. Q: What is the maximum input voltage supported by TNY285KG? A: The maximum input voltage supported by TNY285KG is typically around 600V.

  4. Q: What is the output power range of TNY285KG? A: TNY285KG can handle an output power range of up to 15W, depending on the specific application and design considerations.

  5. Q: Does TNY285KG require an external heatsink for cooling? A: No, TNY285KG is designed to operate without an external heatsink in most low-power applications.

  6. Q: Can TNY285KG be used in high-temperature environments? A: Yes, TNY285KG has a wide operating temperature range and can be used in high-temperature environments up to 150°C.

  7. Q: Is TNY285KG suitable for both AC and DC input applications? A: Yes, TNY285KG is designed to work with both AC and DC input voltages, making it versatile for different applications.

  8. Q: Does TNY285KG have built-in protection features? A: Yes, TNY285KG incorporates various protection features like overvoltage protection, overcurrent protection, and thermal shutdown.

  9. Q: Can TNY285KG be used in battery-powered applications? A: Yes, TNY285KG can be used in battery-powered applications as it supports a wide input voltage range and low power consumption.

  10. Q: Are there any specific design considerations when using TNY285KG? A: Yes, some design considerations include proper PCB layout, component selection, and adherence to the manufacturer's guidelines for optimal performance and reliability.

Please note that the answers provided here are general and may vary depending on the specific application and design requirements.