Richtek USA Inc.
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
RT8009-12GB
Tingnan ang Detalye DataSheets

RT8009-12GB

Product Overview

Category

The RT8009-12GB belongs to the category of voltage regulators.

Use

It is primarily used for regulating and stabilizing voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

The RT8009-12GB comes in a compact surface-mount package.

Essence

The essence of the RT8009-12GB lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 5.5V
  • Output Voltage Range: 0.8V - 3.6V
  • Maximum Output Current: 1.2A
  • Dropout Voltage: 200mV @ 1A
  • Quiescent Current: 60μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The RT8009-12GB has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Adjustable output voltage through external resistors
  • Built-in overcurrent protection prevents damage to the device and connected components
  • Thermal shutdown protection safeguards against overheating
  • Low dropout voltage ensures efficient power conversion
  • Stable output voltage under varying load conditions

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows compatibility with various power sources
  • Compact package size saves board space
  • Overcurrent and thermal protection enhance device reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low-input voltage scenarios

Working Principles

The RT8009-12GB operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a stable output voltage. The feedback pin (FB) is used to adjust the output voltage, while the enable pin (EN) controls the device's operation.

Detailed Application Field Plans

The RT8009-12GB finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wireless communication devices - Battery-powered devices - IoT devices

Detailed and Complete Alternative Models

  1. RT8009-15GB: Similar to RT8009-12GB, but with a higher output voltage range of 0.8V - 5.5V.
  2. RT8009-09GB: Similar to RT8009-12GB, but with a lower output voltage range of 0.8V - 2.9V.
  3. RT8009-18GB: Similar to RT8009-12GB, but with a higher maximum output current of 1.8A.

These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific requirements.

In conclusion, the RT8009-12GB is a versatile voltage regulator that offers high efficiency, adjustable output voltage, and various protection features. Its compact size and wide application field make it a popular choice among electronic device manufacturers.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng RT8009-12GB sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of RT8009-12GB in technical solutions:

  1. Q: What is RT8009-12GB? A: RT8009-12GB is a voltage regulator IC (integrated circuit) commonly used in electronic devices to provide stable power supply.

  2. Q: What is the input voltage range for RT8009-12GB? A: The input voltage range for RT8009-12GB is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range for RT8009-12GB? A: The output voltage range for RT8009-12GB is adjustable, but it can be set to provide a fixed output voltage of 1.2V.

  4. Q: What is the maximum output current of RT8009-12GB? A: The maximum output current of RT8009-12GB is typically around 1.5A.

  5. Q: Can RT8009-12GB be used in battery-powered applications? A: Yes, RT8009-12GB can be used in battery-powered applications as it has a low dropout voltage and operates efficiently even with lower input voltages.

  6. Q: Is RT8009-12GB suitable for automotive applications? A: Yes, RT8009-12GB is suitable for automotive applications as it can withstand high temperatures and has built-in protection features like over-temperature and over-current protection.

  7. Q: Can RT8009-12GB be used in both step-up and step-down voltage conversion? A: No, RT8009-12GB is primarily designed for step-down voltage conversion (buck converter).

  8. Q: Does RT8009-12GB require external components for operation? A: Yes, RT8009-12GB requires a few external components like input/output capacitors and resistors for setting the output voltage.

  9. Q: What is the typical efficiency of RT8009-12GB? A: The typical efficiency of RT8009-12GB is around 90% under normal operating conditions.

  10. Q: Is RT8009-12GB RoHS compliant? A: Yes, RT8009-12GB is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental standards.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of RT8009-12GB.