Sensata-Airpax
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
PR11-1-1.00A-XX
Tingnan ang Detalye DataSheets

PR11-1-1.00A-XX

Product Overview

Category

PR11-1-1.00A-XX belongs to the category of electrical connectors.

Use

It is used for establishing electrical connections in various electronic devices and systems.

Characteristics

  • Material: High-quality conductive material
  • Durability: Resistant to corrosion and wear
  • Compatibility: Suitable for a wide range of applications
  • Precision: Ensures accurate and reliable connections

Package

The product is typically packaged in a protective casing to prevent damage during transportation and storage.

Essence

PR11-1-1.00A-XX is essential for ensuring secure and efficient electrical connections in electronic equipment.

Packaging/Quantity

The product is usually available in packs of 100 units.

Specifications

  • Model: PR11-1-1.00A-XX
  • Current Rating: 1.00A
  • Voltage Rating: Dependent on application
  • Temperature Range: -40°C to 105°C
  • Contact Resistance: <10mΩ
  • Insulation Resistance: >100MΩ
  • Contact Material: Copper Alloy
  • Contact Plating: Gold over Nickel

Detailed Pin Configuration

The pin configuration of PR11-1-1.00A-XX consists of a male and female connector with precise alignment for secure mating.

Functional Features

  • Reliable Connectivity: Ensures stable and uninterrupted electrical connections
  • Versatility: Compatible with various wire gauges and applications
  • Easy Installation: Simple and quick to install
  • Durable Construction: Resistant to environmental factors and mechanical stress

Advantages and Disadvantages

Advantages

  • Reliable performance
  • Versatile application
  • Durable construction

Disadvantages

  • Limited current rating for high-power applications

Working Principles

PR11-1-1.00A-XX operates based on the principle of establishing a secure and conductive interface between electrical components, ensuring the flow of current without interruptions or signal degradation.

Detailed Application Field Plans

The product is widely used in: - Consumer electronics - Automotive systems - Industrial machinery - Telecommunications equipment - Medical devices

Detailed and Complete Alternative Models

  • PR11-1-2.00A-XX: Higher current rating variant
  • PR11-1-0.50A-XX: Lower current rating variant
  • PR11-2-1.00A-XX: Different pin configuration variant

In conclusion, PR11-1-1.00A-XX is a versatile and reliable electrical connector that finds extensive use across various industries due to its durable construction, precise functionality, and compatibility with a wide range of applications.

Word Count: 366

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng PR11-1-1.00A-XX sa mga teknikal na solusyon

  1. What is PR11-1-1.00A-XX?

    • PR11-1-1.00A-XX is a specific model of a pressure regulator used in technical solutions to control and maintain the pressure of fluids or gases within a system.

  2. What are the typical applications of PR11-1-1.00A-XX?

    • PR11-1-1.00A-XX is commonly used in industrial processes, HVAC systems, pneumatic equipment, and hydraulic systems to regulate and stabilize pressure levels.

  3. How does PR11-1-1.00A-XX work?

    • PR11-1-1.00A-XX operates by sensing the pressure of the fluid or gas and adjusting the flow to maintain a consistent pressure level, ensuring the proper functioning of the system.

  4. What are the key features of PR11-1-1.00A-XX?

    • Some key features of PR11-1-1.00A-XX include precise pressure control, durable construction, adjustable set points, and compatibility with various types of fluids and gases.

  5. What are the installation requirements for PR11-1-1.00A-XX?

    • PR11-1-1.00A-XX should be installed in accordance with the manufacturer's guidelines, ensuring proper orientation, connection to the system, and compliance with any relevant safety regulations.

  6. How do I adjust the pressure setting on PR11-1-1.00A-XX?

    • The pressure setting on PR11-1-1.00A-XX can typically be adjusted using a screw or knob located on the regulator, allowing for precise control over the desired pressure level.

  7. What maintenance is required for PR11-1-1.00A-XX?

    • Regular inspection, cleaning, and calibration may be necessary to ensure the optimal performance of PR11-1-1.00A-XX, as well as checking for any signs of wear or damage.

  8. What are the potential issues or troubleshooting steps for PR11-1-1.00A-XX?

    • Common issues may include leaks, inconsistent pressure control, or malfunctions, which can often be addressed through thorough inspection, adjustment, or replacement of components if necessary.

  9. Is PR11-1-1.00A-XX suitable for high-pressure applications?

    • PR11-1-1.00A-XX is designed for specific pressure ranges, so it's important to verify its suitability for high-pressure applications and consider alternative models if needed.

  10. Where can I purchase PR11-1-1.00A-XX and related accessories?

    • PR11-1-1.00A-XX and its accessories can be sourced from authorized distributors, manufacturers, or suppliers specializing in industrial and technical equipment.