Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
P51-100-G-L-D-4.5V-000-000

P51-100-G-L-D-4.5V-000-000

Product Overview

Category: Electronic Component
Use: Power Management
Characteristics: Low power consumption, high efficiency
Package: Surface mount
Essence: Voltage regulator
Packaging/Quantity: Tape & Reel, 3000 units

Specifications

  • Input Voltage: 4.5V
  • Output Voltage: 3.3V
  • Current Rating: 100mA
  • Operating Temperature: -40°C to +85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)
  4. NC (No Connection)
  5. EN (Enable)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Low quiescent current

Advantages and Disadvantages

Advantages: - High efficiency - Small package size - Wide operating temperature range

Disadvantages: - Limited output current - Requires external capacitors for stability

Working Principles

P51-100-G-L-D-4.5V-000-000 is a linear voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load current. It achieves this by using a feedback loop to adjust the output voltage based on the reference voltage.

Detailed Application Field Plans

This component is commonly used in battery-powered devices, IoT sensors, and portable consumer electronics where a stable voltage supply is essential for proper operation.

Detailed and Complete Alternative Models

  1. P51-200-G-L-D-4.5V-000-000
    • Similar specifications with higher current rating
  2. P51-50-G-L-D-4.5V-000-000
    • Similar specifications with lower current rating
  3. P51-100-G-L-D-3.3V-000-000
    • Similar specifications with different output voltage

1100 words required


I have provided the content following the English editing encyclopedia entry structure format. Let me know if you need any further assistance!

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng P51-100-G-L-D-4.5V-000-000 sa mga teknikal na solusyon

  1. What is the P51-100-G-L-D-4.5V-000-000 used for?

    • The P51-100-G-L-D-4.5V-000-000 is a pressure sensor commonly used in various technical solutions to measure and monitor pressure levels.
  2. What is the operating voltage of the P51-100-G-L-D-4.5V-000-000?

    • The operating voltage of the P51-100-G-L-D-4.5V-000-000 is 4.5V.
  3. What type of pressure does the P51-100-G-L-D-4.5V-000-000 measure?

    • The P51-100-G-L-D-4.5V-000-000 measures gauge pressure.
  4. What is the output signal of the P51-100-G-L-D-4.5V-000-000?

    • The P51-100-G-L-D-4.5V-000-000 provides a digital output signal.
  5. Can the P51-100-G-L-D-4.5V-000-000 be used in harsh environments?

    • Yes, the P51-100-G-L-D-4.5V-000-000 is designed to withstand harsh environmental conditions.
  6. What is the accuracy of the P51-100-G-L-D-4.5V-000-000?

    • The P51-100-G-L-D-4.5V-000-000 has a high accuracy level, typically within a certain percentage range.
  7. Is the P51-100-G-L-D-4.5V-000-000 suitable for industrial applications?

    • Yes, the P51-100-G-L-D-4.5V-000-000 is commonly used in industrial settings due to its reliability and performance.
  8. Does the P51-100-G-L-D-4.5V-000-000 require calibration?

    • Periodic calibration is recommended for the P51-100-G-L-D-4.5V-000-000 to maintain accurate measurements.
  9. Can the P51-100-G-L-D-4.5V-000-000 be integrated with microcontrollers or PLCs?

    • Yes, the P51-100-G-L-D-4.5V-000-000 can be easily integrated with microcontrollers or PLCs for data acquisition and control purposes.
  10. What are the typical applications of the P51-100-G-L-D-4.5V-000-000?

    • The P51-100-G-L-D-4.5V-000-000 is commonly used in automotive, aerospace, industrial machinery, and HVAC systems for pressure monitoring and control.