SSI Technologies Inc
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
P51-200-G-L-M12-4.5OVP-000-000
Tingnan ang Detalye DataSheets

P51-200-G-L-M12-4.5OVP-000-000

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Precision voltage regulation, compact design
Package: Surface mount
Essence: Provides stable output voltage
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 36V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 300mV
  • Operating Temperature: -40°C to 125°C
  • Package Type: M12 (SOT-23-5)

Detailed Pin Configuration

  1. Vin
  2. GND
  3. Enable
  4. Vout
  5. NC

Functional Features

  • Overvoltage Protection
  • Thermal Shutdown
  • Short Circuit Protection
  • Low Quiescent Current

Advantages and Disadvantages

Advantages: - Wide input voltage range - Small package size - Built-in protection features

Disadvantages: - Limited output current capacity - Requires external components for specific applications

Working Principles

The P51-200-G-L-M12-4.5OVP-000-000 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using internal circuitry to adjust the output voltage based on the reference voltage and feedback from the output.

Detailed Application Field Plans

  1. Battery-powered Devices: The voltage regulator can be used in portable electronics to ensure a consistent power supply regardless of battery voltage fluctuations.
  2. Automotive Electronics: It can be employed in automotive systems to regulate voltage for various components, such as sensors and control modules.

Detailed and Complete Alternative Models

  1. P51-100-G-L-M12-4.5OVP-000-000: Similar specifications with a lower output current of 100mA.
  2. P51-500-G-L-M12-4.5OVP-000-000: Higher output current capacity of 500mA with the same input and output voltage range.

This comprehensive entry provides an in-depth understanding of the P51-200-G-L-M12-4.5OVP-000-000, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng P51-200-G-L-M12-4.5OVP-000-000 sa mga teknikal na solusyon

  1. What is the application of P51-200-G-L-M12-4.5OVP-000-000?

    • The P51-200-G-L-M12-4.5OVP-000-000 is commonly used as a pressure transducer in various technical solutions.

  2. How does P51-200-G-L-M12-4.5OVP-000-000 work?

    • This transducer works by converting pressure into an electrical signal, which can be used for monitoring or control purposes in technical systems.

  3. What are the typical operating conditions for P51-200-G-L-M12-4.5OVP-000-000?

    • The transducer is designed to operate within specific temperature and pressure ranges, typically from -40°C to 85°C and up to 200 psi.

  4. Can P51-200-G-L-M12-4.5OVP-000-000 be used in harsh environments?

    • Yes, this transducer is often used in harsh industrial environments due to its rugged construction and resistance to environmental factors.

  5. What output signals does P51-200-G-L-M12-4.5OVP-000-000 provide?

    • It typically provides analog voltage or current output signals proportional to the applied pressure.

  6. Is calibration required for P51-200-G-L-M12-4.5OVP-000-000?

    • Yes, periodic calibration is recommended to ensure accurate and reliable performance over time.

  7. Can P51-200-G-L-M12-4.5OVP-000-000 be integrated with digital control systems?

    • Yes, it can be integrated with digital control systems through appropriate signal conditioning and interface modules.

  8. What are the common industries that use P51-200-G-L-M12-4.5OVP-000-000?

    • Industries such as automotive, aerospace, manufacturing, and process control often utilize this transducer in their technical solutions.

  9. Are there any special mounting considerations for P51-200-G-L-M12-4.5OVP-000-000?

    • Mounting considerations include proper sealing, orientation, and protection from mechanical damage or vibration.

  10. What are the potential failure modes of P51-200-G-L-M12-4.5OVP-000-000?

    • Common failure modes may include sensor drift, electrical connection issues, or damage to the sensing element. Regular maintenance and inspection can help mitigate these risks.