STMicroelectronics
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ESDA8V2-1MX2
Tingnan ang Detalye DataSheets

ESDA8V2-1MX2

Product Overview

The ESDA8V2-1MX2 belongs to the category of electronic components and is specifically designed for use in protecting sensitive electronic circuits from electrostatic discharge (ESD). This device exhibits characteristics such as high voltage tolerance, low capacitance, and fast response time. It is typically packaged in a small form factor and is available in tape and reel packaging with a specific quantity per reel.

Specifications

  • Voltage Tolerance: 8.2V
  • Capacitance: <5pF
  • Response Time: <1ns
  • Package Type: SOT-23
  • Packaging Quantity: 3000 units per reel

Detailed Pin Configuration

The ESDA8V2-1MX2 features a standard SOT-23 package with three pins: input, output, and ground. The pinout configuration is as follows: - Pin 1: Input - Pin 2: Ground - Pin 3: Output

Functional Features

  • ESD Protection: Provides robust protection against ESD events, safeguarding sensitive electronic components.
  • Low Capacitance: Minimizes signal degradation and ensures high-speed data transmission.
  • Fast Response Time: Rapidly clamps transient voltages to safe levels, preventing damage to downstream circuitry.

Advantages and Disadvantages

Advantages

  • Effective ESD protection for sensitive electronics
  • Low capacitance preserves signal integrity
  • Fast response time ensures rapid protection activation

Disadvantages

  • Limited voltage tolerance compared to some higher-rated devices
  • Sensitive to improper handling during assembly due to its small size

Working Principles

The ESDA8V2-1MX2 operates based on the principle of avalanche breakdown, where it rapidly conducts excess voltage away from the protected circuit when an ESD event occurs. This prevents the voltage from reaching levels that could damage the sensitive components.

Detailed Application Field Plans

This component is widely used in various electronic devices and systems, including: - Mobile phones - Tablets - Laptops - Wearable devices - IoT (Internet of Things) devices - Industrial control systems

Detailed and Complete Alternative Models

  • ESDA6V1-5W6: 6V voltage tolerance, SOT-323 package
  • ESDA12V1-5W6: 12V voltage tolerance, SOT-323 package
  • ESDA24V1-5W6: 24V voltage tolerance, SOT-323 package

In conclusion, the ESDA8V2-1MX2 is a critical component for protecting sensitive electronic circuits from ESD events. Its combination of low capacitance, fast response time, and compact packaging make it an ideal choice for a wide range of electronic applications.

[Word count: 398]

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ESDA8V2-1MX2 sa mga teknikal na solusyon

  1. What is ESDA8V2-1MX2?

    • ESDA8V2-1MX2 is a transient voltage suppressor designed to protect sensitive electronic components from electrostatic discharge (ESD) and other transient voltage events.

  2. What is the maximum clamping voltage of ESDA8V2-1MX2?

    • The maximum clamping voltage of ESDA8V2-1MX2 is typically around 8 volts, making it suitable for protecting low-voltage electronic circuits.

  3. What are the typical applications of ESDA8V2-1MX2?

    • ESDA8V2-1MX2 is commonly used in various technical solutions such as USB ports, HDMI interfaces, audio/video inputs, and other communication interfaces to protect against ESD and other transient voltage events.

  4. What is the operating voltage range of ESDA8V2-1MX2?

    • The operating voltage range of ESDA8V2-1MX2 is typically from 5V to 24V, making it suitable for a wide range of electronic devices and systems.

  5. How does ESDA8V2-1MX2 provide protection against ESD?

    • ESDA8V2-1MX2 utilizes a combination of diodes and other semiconductor devices to divert transient currents away from sensitive components, thereby protecting them from damage due to ESD.

  6. Can ESDA8V2-1MX2 be used in automotive applications?

    • Yes, ESDA8V2-1MX2 is suitable for automotive applications where protection against ESD and transient voltages is required, such as in-vehicle infotainment systems, USB charging ports, and other electronic interfaces.

  7. What is the response time of ESDA8V2-1MX2?

    • The response time of ESDA8V2-1MX2 is typically very fast, on the order of nanoseconds, ensuring rapid protection against transient voltage events.

  8. Is ESDA8V2-1MX2 RoHS compliant?

    • Yes, ESDA8V2-1MX2 is compliant with the Restriction of Hazardous Substances (RoHS) directive, making it suitable for use in environmentally conscious applications.

  9. Can ESDA8V2-1MX2 be used in high-speed data transmission applications?

    • Yes, ESDA8V2-1MX2 can be used in high-speed data transmission applications to protect sensitive signal lines from ESD and other transient voltage disturbances.

  10. What are the recommended layout and placement guidelines for ESDA8V2-1MX2?

    • It is recommended to place ESDA8V2-1MX2 as close as possible to the protected circuitry, with short and direct connections to minimize parasitic inductance and ensure effective protection.