STMicroelectronics
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
ST490ABDR
Tingnan ang Detalye DataSheets

ST490ABDR

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Conditioning and Data Transmission
  • Characteristics: Low Power Consumption, High Speed, Small Size
  • Package: SOP-8 (Small Outline Package)
  • Essence: Analog Multiplexer and Demultiplexer
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Range: 0V to Vcc
  • On-Resistance: 70Ω (typical)
  • Bandwidth: 200MHz (typical)
  • Number of Channels: 4

Detailed Pin Configuration

  1. IN1: Input Channel 1
  2. IN2: Input Channel 2
  3. IN3: Input Channel 3
  4. IN4: Input Channel 4
  5. GND: Ground
  6. EN: Enable Pin
  7. OUT: Output
  8. Vcc: Supply Voltage

Functional Features

  • Analog multiplexing and demultiplexing of four input channels
  • Low power consumption for energy-efficient operation
  • High-speed data transmission with a bandwidth of up to 200MHz
  • Small size and compact SOP-8 package for space-constrained applications
  • Wide operating voltage range allows flexibility in power supply selection

Advantages and Disadvantages

Advantages: - Efficient signal conditioning and data transmission - Compact size enables integration into various electronic devices - Wide operating temperature range for versatile usage scenarios

Disadvantages: - Limited number of channels may not be suitable for applications requiring more inputs - On-resistance may introduce slight signal attenuation

Working Principles

The ST490ABDR is an analog multiplexer and demultiplexer integrated circuit. It allows for the selection of one input channel from four available channels and routes it to the output pin. The enable pin (EN) controls the operation of the device. When enabled, the selected input channel is connected to the output pin, while the other channels remain disconnected. This enables efficient signal conditioning and data transmission in various applications.

Detailed Application Field Plans

The ST490ABDR finds application in a wide range of fields, including:

  1. Communication Systems: Used for signal routing and switching in telecommunication networks.
  2. Industrial Automation: Enables data transmission between sensors and control systems.
  3. Test and Measurement Equipment: Facilitates signal routing and data acquisition in testing setups.
  4. Automotive Electronics: Provides analog signal multiplexing in automotive control units.
  5. Consumer Electronics: Utilized in audio/video equipment for signal switching and routing.

Detailed and Complete Alternative Models

  1. CD4051B: Analog Multiplexer/Demultiplexer with 8 channels
  2. ADG721: Low Voltage, CMOS Analog Multiplexer/Demultiplexer
  3. MAX4617: Precision, Low-Voltage, SPST Analog Switch

These alternative models offer similar functionality and can be considered as substitutes for the ST490ABDR depending on specific requirements and design constraints.

Word count: 366 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng ST490ABDR sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of ST490ABDR in technical solutions:

  1. Q: What is ST490ABDR? A: ST490ABDR is a specific model or type of integrated circuit (IC) used for data transmission and reception in industrial applications.

  2. Q: What are the key features of ST490ABDR? A: Some key features of ST490ABDR include low power consumption, high noise immunity, wide operating voltage range, and compatibility with various communication protocols.

  3. Q: In which technical solutions can ST490ABDR be used? A: ST490ABDR can be used in various technical solutions such as industrial automation systems, process control systems, robotics, and communication networks.

  4. Q: How does ST490ABDR ensure reliable data transmission? A: ST490ABDR incorporates built-in protection mechanisms like fail-safe biasing, thermal shutdown, and short-circuit protection to ensure reliable data transmission even in harsh industrial environments.

  5. Q: Can ST490ABDR handle long-distance data transmission? A: Yes, ST490ABDR has a high-speed differential bus interface that enables it to handle long-distance data transmission up to several hundred meters.

  6. Q: Is ST490ABDR compatible with different communication protocols? A: Yes, ST490ABDR is designed to be compatible with various communication protocols such as RS-485, RS-422, and PROFIBUS.

  7. Q: What is the maximum data rate supported by ST490ABDR? A: The maximum data rate supported by ST490ABDR is typically around 20 Mbps, making it suitable for high-speed data transmission applications.

  8. Q: Can ST490ABDR operate in harsh industrial environments? A: Yes, ST490ABDR is designed to operate in harsh industrial environments with wide temperature ranges and high levels of electrical noise.

  9. Q: Are there any specific design considerations when using ST490ABDR? A: When using ST490ABDR, it is important to consider proper termination, grounding, and layout techniques to ensure optimal performance and minimize signal integrity issues.

  10. Q: Where can I find more information about ST490ABDR and its application in technical solutions? A: You can refer to the datasheet, application notes, and technical documentation provided by the manufacturer of ST490ABDR for more detailed information on its application in technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases.