Tingnan ang mga detalye para sa mga detalye ng produkto.
STF9NM60N
Product Overview
Category
STF9NM60N belongs to the category of power MOSFETs.
Use
It is commonly used in power supply applications, motor control, and lighting systems.
Characteristics
- High voltage capability
- Low input capacitance
- Fast switching speed
- Low on-resistance
Package
The STF9NM60N is typically available in a TO-220 package.
Essence
The essence of STF9NM60N lies in its ability to efficiently control high power loads with minimal losses.
Packaging/Quantity
It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Drain-Source Voltage (VDS): 600V
- Continuous Drain Current (ID): 9A
- On-Resistance (RDS(on)): 1.4Ω
- Power Dissipation (PD): 80W
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
The STF9NM60N features a standard three-pin configuration: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High voltage capability allows for use in various power applications.
- Low input capacitance enables fast switching speeds.
- Low on-resistance minimizes power losses and improves efficiency.
Advantages and Disadvantages
Advantages
- High voltage capability
- Fast switching speed
- Low on-resistance
Disadvantages
- Higher cost compared to lower-rated MOSFETs
- Sensitivity to static electricity
Working Principles
STF9NM60N operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
Power Supply Applications
STF9NM60N can be used in switch-mode power supplies for efficient voltage regulation and power conversion.
Motor Control
Its fast switching speed makes it suitable for motor control applications, providing precise and responsive control over motor operation.
Lighting Systems
In lighting systems, STF9NM60N can be utilized for driving high-power LEDs or controlling the brightness of traditional lighting sources.
Detailed and Complete Alternative Models
- IRF840: Similar voltage and current ratings
- FQP30N06L: Lower voltage rating but comparable current handling capacity
- IRL540: Higher voltage rating and lower on-resistance
In conclusion, STF9NM60N is a versatile power MOSFET with high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of power electronics applications.
[Word Count: 398]
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng STF9NM60N sa mga teknikal na solusyon
What is the maximum drain-source voltage of STF9NM60N?
- The maximum drain-source voltage of STF9NM60N is 600V.
What is the continuous drain current of STF9NM60N?
- The continuous drain current of STF9NM60N is 9A.
What is the on-resistance of STF9NM60N?
- The on-resistance of STF9NM60N is typically 0.85 ohms.
What are the typical applications of STF9NM60N?
- STF9NM60N is commonly used in power supplies, motor control, and lighting applications.
What is the operating temperature range of STF9NM60N?
- The operating temperature range of STF9NM60N is -55°C to 150°C.
Does STF9NM60N require a heat sink for operation?
- It is recommended to use a heat sink when operating STF9NM60N at high currents or in high ambient temperatures.
Is STF9NM60N suitable for high-frequency switching applications?
- Yes, STF9NM60N is suitable for high-frequency switching due to its low on-resistance and fast switching characteristics.
What is the gate threshold voltage of STF9NM60N?
- The gate threshold voltage of STF9NM60N is typically 3V.
Can STF9NM60N be used in automotive applications?
- Yes, STF9NM60N is suitable for automotive applications due to its ruggedness and high voltage capability.
Does STF9NM60N have built-in protection features?
- STF9NM60N includes built-in protection against overcurrent, overtemperature, and short-circuit conditions.