Tingnan ang mga detalye para sa mga detalye ng produkto.
NTCG164QH105JT1
Product Overview
NTCG164QH105JT1 is a thermistor belonging to the category of electronic components. It is commonly used for temperature sensing and compensation in various electronic circuits. This thermistor exhibits characteristics such as high sensitivity to temperature changes, small size, and reliable performance. The product is typically packaged in tape and reel format, with a quantity of 3000 pieces per reel.
Specifications
- Resistance Value: 1 MOhm
- Tolerance: ±5%
- Operating Temperature Range: -40°C to 105°C
- Thermal Time Constant: 7 seconds (maximum)
Detailed Pin Configuration
The NTCG164QH105JT1 thermistor has two leads, with the pin configuration as follows: 1. Pin 1: Connected to one end of the thermistor element 2. Pin 2: Connected to the other end of the thermistor element
Functional Features
- High sensitivity to temperature changes
- Fast response time
- Small size for easy integration into circuit designs
- Wide operating temperature range
Advantages
- Precise temperature measurement and compensation
- Compact size allows for versatile application in various electronic devices
- Reliable performance over a wide temperature range
Disadvantages
- Limited precision compared to some other temperature sensing technologies
- Sensitivity to external factors such as humidity and aging
Working Principles
The NTCG164QH105JT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic makes it suitable for temperature sensing and compensation applications in electronic circuits.
Detailed Application Field Plans
The NTCG164QH105JT1 thermistor finds extensive use in the following applications: - Temperature monitoring and control in consumer electronics - Thermal management in automotive systems - Temperature compensation in battery charging circuits - Industrial process control and monitoring
Detailed and Complete Alternative Models
- NTCG164QH103JT1: Similar specifications with a lower resistance value
- NTCG164QH104JT1: Similar specifications with a higher resistance value
- NTCG164QH106JT1: Similar specifications with an extended temperature range
In conclusion, the NTCG164QH105JT1 thermistor offers reliable temperature sensing and compensation capabilities, making it a valuable component in various electronic applications.
Word count: 346
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng NTCG164QH105JT1 sa mga teknikal na solusyon
What is the NTCG164QH105JT1 used for?
- The NTCG164QH105JT1 is a thermistor commonly used for temperature sensing and compensation in various technical solutions.
What is the resistance value of NTCG164QH105JT1 at 25°C?
- The resistance value of NTCG164QH105JT1 at 25°C is 1 megaohm (1,000,000 ohms).
How does NTCG164QH105JT1 behave with changes in temperature?
- NTCG164QH105JT1 is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the temperature increases.
What is the operating temperature range of NTCG164QH105JT1?
- The operating temperature range of NTCG164QH105JT1 is typically from -40°C to 125°C.
Can NTCG164QH105JT1 be used for over-temperature protection?
- Yes, NTCG164QH105JT1 can be used for over-temperature protection due to its characteristic of rapidly changing resistance with temperature.
Is NTCG164QH105JT1 suitable for battery pack temperature monitoring?
- Yes, NTCG164QH105JT1 is commonly used for battery pack temperature monitoring due to its high resistance and sensitivity to temperature changes.
What are the typical applications of NTCG164QH105JT1 in automotive systems?
- NTCG164QH105JT1 is often used in automotive systems for temperature compensation in engine control units, battery management systems, and climate control systems.
Does NTCG164QH105JT1 require any calibration before use?
- NTCG164QH105JT1 may require some calibration to ensure accurate temperature measurements in specific technical solutions.
Can NTCG164QH105JT1 be used in moisture-prone environments?
- NTCG164QH105JT1 is not designed for direct exposure to moisture and should be protected in such environments.
Are there any recommended soldering techniques for NTCG164QH105JT1?
- It is recommended to follow the manufacturer's guidelines for soldering NTCG164QH105JT1 to avoid damaging the component during assembly.