Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
74ABT162501DGGRE4
Tingnan ang Detalye DataSheets

Encyclopedia Entry: 74ABT162501DGGRE4

Product Overview

Category

The 74ABT162501DGGRE4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data transmission and storage purposes.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Robustness against noise and interference

Package

The 74ABT162501DGGRE4 is available in a surface mount package, specifically the DGG (TSSOP) package.

Essence

The essence of this IC lies in its ability to efficiently transmit and store digital data within electronic systems.

Packaging/Quantity

The 74ABT162501DGGRE4 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.7V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Logic Family: ABT
  • Number of Bits: 16
  • Number of Pins: 48
  • Package Type: TSSOP

Detailed Pin Configuration

The 74ABT162501DGGRE4 has a total of 48 pins, each serving a specific function. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input A0
  3. Pin 3: Data Input A1
  4. Pin 4: Data Input A2
  5. Pin 5: Data Input A3
  6. Pin 6: Data Input A4
  7. Pin 7: Data Input A5
  8. Pin 8: Data Input A6
  9. Pin 9: Data Input A7
  10. Pin 10: Data Input A8
  11. Pin 11: Data Input A9
  12. Pin 12: Data Input A10
  13. Pin 13: Data Input A11
  14. Pin 14: Data Input A12
  15. Pin 15: Data Input A13
  16. Pin 16: Data Input A14
  17. Pin 17: Data Input A15
  18. Pin 18: Output B0
  19. Pin 19: Output B1
  20. Pin 20: Output B2
  21. Pin 21: Output B3
  22. Pin 22: Output B4
  23. Pin 23: Output B5
  24. Pin 24: Output B6
  25. Pin 25: Output B7
  26. Pin 26: Output B8
  27. Pin 27: Output B9
  28. Pin 28: Output B10
  29. Pin 29: Output B11
  30. Pin 30: Output B12
  31. Pin 31: Output B13
  32. Pin 32: Output B14
  33. Pin 33: Output B15
  34. Pin 34: GND (Ground)
  35. Pin 35: VCC (Supply Voltage)
  36. Pin 36: Clock Input (CLK)
  37. Pin 37: Output Enable (OE)
  38. Pin 38: Data Input G0
  39. Pin 39: Data Input G1
  40. Pin 40: Data Input G2
  41. Pin 41: Data Input G3
  42. Pin 42: Data Input G4
  43. Pin 43: Data Input G5
  44. Pin 44: Data Input G6
  45. Pin 45: Data Input G7
  46. Pin 46: Output Enable (OE)
  47. Pin 47: Output Enable (OE)
  48. Pin 48: VCC (Supply Voltage)

Functional Features

The 74ABT162501DGGRE4 offers the following functional features:

  • Bidirectional data transmission between two independent buses
  • Output enable control for each bus
  • Wide operating voltage range allows compatibility with various systems
  • High-speed operation enables efficient data transfer
  • Robustness against noise and interference ensures reliable performance

Advantages and Disadvantages

Advantages

  • High-speed operation facilitates fast data transmission
  • Low power consumption helps conserve energy
  • Wide operating voltage range enhances compatibility
  • Robustness against noise and interference ensures reliable performance

Disadvantages

  • Limited number of bits (16) may not be suitable for applications requiring larger data storage or transmission capacity
  • Surface mount package may require specialized equipment for installation or replacement

Working Principles

The 74ABT162501DGGRE

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng 74ABT162501DGGRE4 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of 74ABT162501DGGRE4 in technical solutions:

  1. Q: What is the function of the 74ABT162501DGGRE4? A: The 74ABT162501DGGRE4 is a 16-bit universal bus transceiver with 3-state outputs.

  2. Q: What voltage levels does the 74ABT162501DGGRE4 support? A: The 74ABT162501DGGRE4 supports both TTL and CMOS voltage levels.

  3. Q: Can the 74ABT162501DGGRE4 be used for bidirectional data transfer? A: Yes, the 74ABT162501DGGRE4 can be used for bidirectional data transfer between two buses.

  4. Q: What is the maximum operating frequency of the 74ABT162501DGGRE4? A: The maximum operating frequency of the 74ABT162501DGGRE4 is typically around 200 MHz.

  5. Q: Does the 74ABT162501DGGRE4 have built-in ESD protection? A: Yes, the 74ABT162501DGGRE4 has built-in ESD protection on all inputs and outputs.

  6. Q: Can the 74ABT162501DGGRE4 handle hot-swapping of buses? A: Yes, the 74ABT162501DGGRE4 is designed to handle hot-swapping of buses without causing damage.

  7. Q: What is the power supply voltage range for the 74ABT162501DGGRE4? A: The power supply voltage range for the 74ABT162501DGGRE4 is typically between 4.5V and 5.5V.

  8. Q: Does the 74ABT162501DGGRE4 have any special features for bus isolation? A: Yes, the 74ABT162501DGGRE4 has a direction control pin that allows for bus isolation when needed.

  9. Q: Can the 74ABT162501DGGRE4 be used in high-speed data communication applications? A: Yes, the 74ABT162501DGGRE4 is suitable for high-speed data communication due to its fast switching times.

  10. Q: Are there any specific layout considerations for using the 74ABT162501DGGRE4? A: Yes, it is recommended to follow the manufacturer's guidelines for proper PCB layout and decoupling capacitor placement.

Please note that these answers are general and may vary depending on the specific application and requirements.