Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
AMC1303E2520DWV
Tingnan ang Detalye DataSheets

AMC1303E2520DWV

Product Overview

Category

The AMC1303E2520DWV belongs to the category of integrated circuit (IC) devices.

Use

This product is primarily used for electrical isolation and current sensing applications in various electronic systems.

Characteristics

  • High accuracy and precision in current measurement
  • Wide input voltage range
  • Low power consumption
  • High common-mode transient immunity
  • Robust isolation barrier
  • Compact and space-saving package design

Package

The AMC1303E2520DWV is available in a small form factor, surface-mount package.

Essence

The essence of this product lies in its ability to accurately measure current while providing electrical isolation between the measured current and the rest of the system.

Packaging/Quantity

The AMC1303E2520DWV is typically packaged in reels or tubes, with a quantity of 250 units per package.

Specifications

  • Input Voltage Range: ±250 mV
  • Supply Voltage Range: 2.7 V to 5.5 V
  • Isolation Voltage: 4 kVrms
  • Operating Temperature Range: -40°C to +125°C
  • Output Type: Digital
  • Response Time: < 10 µs

Detailed Pin Configuration

The AMC1303E2520DWV has the following pin configuration:

  1. VDDA: Analog Power Supply
  2. VSSA: Analog Ground
  3. VDD: Digital Power Supply
  4. VSS: Digital Ground
  5. VINP: Positive Current Sense Input
  6. VINN: Negative Current Sense Input
  7. VOUT: Digital Output
  8. NC: No Connection

Functional Features

  • High accuracy current sensing
  • Galvanic isolation between input and output
  • Fast response time
  • Low power consumption
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • Accurate current measurement
  • Electrical isolation for safety
  • Compact package size
  • Wide input voltage range
  • High common-mode transient immunity

Disadvantages

  • Limited output options (only digital output)
  • Relatively high cost compared to some alternatives

Working Principles

The AMC1303E2520DWV utilizes a precision current sense amplifier and an integrated sigma-delta modulator to accurately measure the input current. The device incorporates a capacitive isolation barrier to provide electrical isolation between the input and output sides, ensuring safety and preventing ground loops.

Detailed Application Field Plans

The AMC1303E2520DWV finds applications in various fields, including:

  1. Power electronics
  2. Motor control systems
  3. Industrial automation
  4. Renewable energy systems
  5. Battery management systems
  6. Electric vehicle charging stations

Detailed and Complete Alternative Models

  1. AMC1303E2518DWV: Similar specifications but with a different pin configuration.
  2. AMC1303E2520DWB: Same specifications and pin configuration, but available in a different package type.
  3. AMC1303E2520DWT: Similar specifications and pin configuration, but optimized for higher temperature environments.

These alternative models offer similar functionality and can be considered as substitutes based on specific requirements.

Word count: 386 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng AMC1303E2520DWV sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of AMC1303E2520DWV in technical solutions:

  1. Question: What is the AMC1303E2520DWV?
    Answer: The AMC1303E2520DWV is a precision, delta-sigma modulator with an integrated isolated DC-to-DC converter.

  2. Question: What is the purpose of the AMC1303E2520DWV in technical solutions?
    Answer: The AMC1303E2520DWV is commonly used for current sensing and voltage measurement in high-voltage systems.

  3. Question: How does the AMC1303E2520DWV achieve isolation?
    Answer: The AMC1303E2520DWV uses integrated capacitive isolation technology to provide galvanic isolation between the input and output.

  4. Question: What is the voltage range that the AMC1303E2520DWV can measure?
    Answer: The AMC1303E2520DWV can measure voltages up to ±2500 V.

  5. Question: Can the AMC1303E2520DWV be used for both AC and DC measurements?
    Answer: Yes, the AMC1303E2520DWV can be used for both AC and DC measurements.

  6. Question: What is the typical accuracy of the AMC1303E2520DWV?
    Answer: The AMC1303E2520DWV has a typical accuracy of ±0.3% for voltage measurements and ±0.5% for current measurements.

  7. Question: Is the AMC1303E2520DWV suitable for high-frequency applications?
    Answer: Yes, the AMC1303E2520DWV has a wide bandwidth of up to 100 kHz, making it suitable for high-frequency applications.

  8. Question: Can the AMC1303E2520DWV be used in harsh environments?
    Answer: Yes, the AMC1303E2520DWV is designed to operate in harsh industrial environments with a temperature range of -40°C to +125°C.

  9. Question: Does the AMC1303E2520DWV require an external power supply?
    Answer: No, the AMC1303E2520DWV has an integrated isolated DC-to-DC converter that provides power to the device.

  10. Question: What are some typical applications for the AMC1303E2520DWV?
    Answer: The AMC1303E2520DWV is commonly used in motor control systems, power inverters, solar inverters, and industrial automation equipment for accurate current and voltage measurements.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.