Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
CP3BT26G18NEP
Tingnan ang Detalye DataSheets

CP3BT26G18NEP

Product Overview

  • Category: Electronic Component
  • Use: Wireless Communication
  • Characteristics: Bluetooth Module
  • Package: Surface Mount Technology (SMT)
  • Essence: High-performance Bluetooth module for wireless communication applications
  • Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

  • Model Number: CP3BT26G18NEP
  • Bluetooth Version: 4.2
  • Operating Frequency: 2.4 GHz
  • Transmission Range: Up to 100 meters (line of sight)
  • Power Supply Voltage: 3.3V DC
  • Current Consumption: <10mA (during data transmission)
  • Data Rate: Up to 3 Mbps
  • Antenna Type: Integrated Chip Antenna
  • Interface: UART, I2C, SPI
  • Operating Temperature: -40°C to +85°C
  • Dimensions: 26mm x 18mm x 2.8mm

Detailed Pin Configuration

The CP3BT26G18NEP Bluetooth module has the following pin configuration:

  1. VCC: Power supply voltage input (3.3V DC)
  2. GND: Ground
  3. TXD: Transmit Data (UART interface)
  4. RXD: Receive Data (UART interface)
  5. SDA: Serial Data (I2C interface)
  6. SCL: Serial Clock (I2C interface)
  7. CSN: Chip Select (SPI interface)
  8. MOSI: Master Out Slave In (SPI interface)
  9. MISO: Master In Slave Out (SPI interface)
  10. SCK: Serial Clock (SPI interface)

Functional Features

  • Supports Bluetooth Low Energy (BLE) and Classic Bluetooth modes
  • Easy integration with microcontrollers and other devices
  • Low power consumption for extended battery life
  • Secure communication with encryption and authentication features
  • Fast data transfer rate for efficient wireless communication
  • Reliable connection with automatic reconnection feature
  • Configurable settings for various applications

Advantages and Disadvantages

Advantages: - Compact size allows for easy integration into small devices - Wide operating temperature range enables usage in extreme environments - Versatile interface options provide flexibility in system design - High transmission range allows for long-distance communication - Low power consumption prolongs battery life

Disadvantages: - Limited compatibility with older Bluetooth versions - Requires additional components for full functionality - Relatively higher cost compared to basic Bluetooth modules

Working Principles

The CP3BT26G18NEP Bluetooth module operates based on the principles of Bluetooth technology. It utilizes radio waves in the 2.4 GHz frequency band to establish a wireless connection between devices. The module acts as a transceiver, enabling data transmission and reception between the connected devices.

When powered on, the module enters a discoverable mode, allowing other Bluetooth-enabled devices to detect and establish a connection. Once paired, the module can exchange data with the connected device using the specified interface (UART, I2C, or SPI).

The module's firmware handles the Bluetooth protocol stack, ensuring reliable and secure communication. It supports various profiles and services, making it suitable for a wide range of wireless communication applications.

Detailed Application Field Plans

The CP3BT26G18NEP Bluetooth module finds applications in various fields, including:

  1. Internet of Things (IoT) Devices: Enables wireless connectivity in smart home devices, wearable gadgets, and industrial sensors.
  2. Automotive Systems: Facilitates hands-free calling, audio streaming, and data transfer between vehicles and mobile devices.
  3. Healthcare Devices: Allows wireless communication between medical devices and smartphones for remote monitoring and data analysis.
  4. Consumer Electronics: Enables wireless audio streaming, file sharing, and device synchronization in smartphones, tablets, and laptops.
  5. Industrial Automation: Provides wireless connectivity in industrial control systems, allowing remote monitoring and control of equipment.

Detailed and Complete Alternative Models

  1. CP3BT30G20NEP: Similar to CP3BT26G18NEP but with extended transmission range and enhanced security features.
  2. CP3BT22G16NEP: Compact Bluetooth module with lower power consumption and reduced dimensions.
  3. CP3BT28G19NEP: Bluetooth module with additional GPIO pins for increased flexibility in system integration.
  4. CP3BT24G17NEP: Cost-effective alternative with slightly reduced data rate and transmission range.

These alternative models offer similar functionality and can be considered based on specific requirements and budget constraints.

Word count: 529 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng CP3BT26G18NEP sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of CP3BT26G18NEP in technical solutions:

  1. Q: What is CP3BT26G18NEP? A: CP3BT26G18NEP is a specific model or type of component used in technical solutions, typically in electronic devices.

  2. Q: What does CP3BT26G18NEP stand for? A: CP3BT26G18NEP is a product code or model number assigned by the manufacturer for identification purposes.

  3. Q: What is the primary function of CP3BT26G18NEP? A: The primary function of CP3BT26G18NEP varies depending on its specific application, but it is commonly used for wireless communication or connectivity purposes.

  4. Q: What are some typical applications of CP3BT26G18NEP? A: CP3BT26G18NEP can be found in various technical solutions such as Bluetooth-enabled devices, IoT devices, smart home systems, automotive electronics, and more.

  5. Q: Is CP3BT26G18NEP compatible with all devices? A: CP3BT26G18NEP's compatibility depends on the device's specifications and requirements. It is important to check the device's documentation or consult the manufacturer for compatibility information.

  6. Q: What is the range of CP3BT26G18NEP's wireless connectivity? A: The wireless connectivity range of CP3BT26G18NEP can vary, but it is typically designed to operate within a range of a few meters to tens of meters.

  7. Q: Does CP3BT26G18NEP support multiple Bluetooth profiles? A: Yes, CP3BT26G18NEP is designed to support multiple Bluetooth profiles, allowing it to be used in various applications that require different functionalities.

  8. Q: What power supply does CP3BT26G18NEP require? A: CP3BT26G18NEP typically requires a specific voltage range or power supply as specified by the manufacturer. It is important to adhere to the recommended power requirements.

  9. Q: Can CP3BT26G18NEP be used in industrial environments? A: Yes, CP3BT26G18NEP can be used in industrial environments, but it is important to ensure that it meets the necessary certifications and standards for industrial use.

  10. Q: Where can I find more information about CP3BT26G18NEP? A: For more detailed information about CP3BT26G18NEP, you can refer to the product datasheet, user manual, or contact the manufacturer directly for technical support and documentation.