Tingnan ang mga detalye para sa mga detalye ng produkto.
DRV5053OAEDBZRQ1
Product Category
The DRV5053OAEDBZRQ1 belongs to the category of magnetic sensors.
Basic Information Overview
- Category: Magnetic sensor
- Use: The DRV5053OAEDBZRQ1 is used for detecting the presence, strength, and polarity of a magnetic field.
- Characteristics: This sensor has high sensitivity, low hysteresis, and a wide operating voltage range. It is designed for applications requiring accurate magnetic field measurements.
- Package: The DRV5053OAEDBZRQ1 comes in a small outline package (DBZ) with a quantity of 2500 units per reel.
- Essence: The essence of this sensor lies in its ability to provide precise and reliable magnetic field detection in various applications.
- Packaging/Quantity: The DRV5053OAEDBZRQ1 is available in tape and reel packaging with 2500 units per reel.
Specifications
- Operating Voltage Range: 2.7V to 5.5V
- Output Type: Analog
- Operating Temperature Range: -40°C to 125°C
- Hysteresis: 1.5mT (max)
- Sensitivity: 12mV/mT
- Bandwidth: 20kHz (typ)
Detailed Pin Configuration
The DRV5053OAEDBZRQ1 has a 4-pin configuration: 1. VCC: Power supply input 2. GND: Ground connection 3. OUT: Analog output 4. EN: Enable pin
Functional Features
- High Sensitivity: The sensor offers a high sensitivity of 12mV/mT, enabling accurate detection of magnetic fields.
- Low Hysteresis: With a maximum hysteresis of 1.5mT, the sensor provides precise and stable measurements.
- Wide Operating Voltage Range: The sensor can operate within a wide voltage range of 2.7V to 5.5V, making it suitable for various power supply configurations.
Advantages and Disadvantages
Advantages: - High sensitivity for accurate measurements - Low hysteresis for stable performance - Wide operating voltage range for flexibility in applications
Disadvantages: - Limited operating temperature range (-40°C to 125°C) - Analog output may require additional signal conditioning for some applications
Working Principles
The DRV5053OAEDBZRQ1 operates based on the Hall effect, where the presence of a magnetic field causes a proportional change in the output voltage. This change is then converted into a measurable signal, allowing for the detection and characterization of the magnetic field.
Detailed Application Field Plans
The DRV5053OAEDBZRQ1 is well-suited for a variety of applications, including: - Proximity sensing in industrial equipment - Current sensing in automotive systems - Position sensing in consumer electronics - Flow rate sensing in fluid control systems
Detailed and Complete Alternative Models
Some alternative models to the DRV5053OAEDBZRQ1 include: - DRV5053UAEDBZR: Similar specifications with a different package type - DRV5053RAEDBZR: Enhanced temperature range with similar sensitivity and hysteresis characteristics - DRV5053PAEDBZR: Lower sensitivity but wider operating temperature range
In conclusion, the DRV5053OAEDBZRQ1 is a highly sensitive magnetic sensor with a wide operating voltage range, making it suitable for various applications that require accurate magnetic field detection.
Word count: 452
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng DRV5053OAEDBZRQ1 sa mga teknikal na solusyon
What is the DRV5053OAEDBZRQ1?
- The DRV5053OAEDBZRQ1 is a Hall effect sensor designed for accurate and reliable magnetic field sensing applications.
What is the operating voltage range of DRV5053OAEDBZRQ1?
- The operating voltage range of DRV5053OAEDBZRQ1 is 2.7V to 5.5V.
What is the output type of DRV5053OAEDBZRQ1?
- DRV5053OAEDBZRQ1 has a ratiometric analog output.
What is the sensitivity of DRV5053OAEDBZRQ1?
- The sensitivity of DRV5053OAEDBZRQ1 is typically 2.5mV/Gauss.
What are the typical applications of DRV5053OAEDBZRQ1?
- Typical applications of DRV5053OAEDBZRQ1 include position sensing, proximity sensing, and current sensing in automotive, industrial, and consumer electronics.
What is the temperature range for operation of DRV5053OAEDBZRQ1?
- DRV5053OAEDBZRQ1 operates within a temperature range of -40°C to 125°C.
Does DRV5053OAEDBZRQ1 require external compensation for temperature effects?
- No, DRV5053OAEDBZRQ1 includes an integrated temperature compensation feature, eliminating the need for external compensation.
Can DRV5053OAEDBZRQ1 be used in safety-critical applications?
- Yes, DRV5053OAEDBZRQ1 is AEC-Q100 qualified and suitable for use in safety-critical automotive applications.
What is the package type of DRV5053OAEDBZRQ1?
- DRV5053OAEDBZRQ1 is available in a small, leadless X2SON package.
Is there any evaluation module available for DRV5053OAEDBZRQ1?
- Yes, Texas Instruments offers an evaluation module (EVM) for DRV5053OAEDBZRQ1 to facilitate testing and development.