The DS90CF384AQMTX/NOPB has the following pin configuration:
Pin 1: VCC
Pin 2: GND
Pin 3: RXIN0-
Pin 4: RXIN0+
Pin 5: RXIN1-
Pin 6: RXIN1+
Pin 7: RXIN2-
Pin 8: RXIN2+
Pin 9: RXIN3-
Pin 10: RXIN3+
Pin 11: RXCLK-
Pin 12: RXCLK+
Pin 13: RXOUT0-
Pin 14: RXOUT0+
Pin 15: RXOUT1-
Pin 16: RXOUT1+
Pin 17: RXOUT2-
Pin 18: RXOUT2+
Pin 19: RXOUT3-
Pin 20: RXOUT3+
Pin 21: TXIN0-
Pin 22: TXIN0+
Pin 23: TXIN1-
Pin 24: TXIN1+
Pin 25: TXIN2-
Pin 26: TXIN2+
Pin 27: TXIN3-
Pin 28: TXIN3+
Pin 29: TXCLK-
Pin 30: TXCLK+
Pin 31: TXOUT0-
Pin 32: TXOUT0+
Pin 33: TXOUT1-
Pin 34: TXOUT1+
Pin 35: TXOUT2-
Pin 36: TXOUT2+
Pin 37: TXOUT3-
Pin 38: TXOUT3+
Advantages: - High-speed data transmission capability - Low power consumption - Noise immunity - Clock recovery for reliable synchronization
Disadvantages: - Limited number of channels (4 in this case) - Requires additional components for complete system integration
The DS90CF384AQMTX/NOPB is a Serializer/Deserializer (SerDes) IC that converts parallel data from a source device into serial data for transmission over a high-speed LVDS interface. On the receiving end, it converts the received serial data back into parallel format.
The IC uses LVDS signaling, which provides low voltage swing and differential signaling to achieve high-speed data transmission while minimizing power consumption and electromagnetic interference.
The DS90CF384AQMTX/NOPB also incorporates clock recovery circuitry, which extracts the clock signal from the incoming data stream, ensuring reliable synchronization between the transmitting and receiving devices.
The DS90CF384AQMTX/NOPB is commonly used in various applications that require high-speed data transmission over long distances. Some of the typical application fields include:
Question: What is the maximum data rate supported by DS90CF384AQMTX/NOPB?
Answer: The DS90CF384AQMTX/NOPB supports a maximum data rate of 135 MHz.
Question: Can DS90CF384AQMTX/NOPB be used for LVDS to CMOS conversion?
Answer: Yes, DS90CF384AQMTX/NOPB can be used for LVDS to CMOS conversion.
Question: What is the supply voltage range for DS90CF384AQMTX/NOPB?
Answer: The supply voltage range for DS90CF384AQMTX/NOPB is 3.0V to 3.6V.
Question: Does DS90CF384AQMTX/NOPB support spread spectrum clocking?
Answer: No, DS90CF384AQMTX/NOPB does not support spread spectrum clocking.
Question: Is DS90CF384AQMTX/NOPB suitable for automotive applications?
Answer: Yes, DS90CF384AQMTX/NOPB is suitable for automotive applications.
Question: What is the typical power consumption of DS90CF384AQMTX/NOPB?
Answer: The typical power consumption of DS90CF384AQMTX/NOPB is 100mW.
Question: Can DS90CF384AQMTX/NOPB be used in video transmission systems?
Answer: Yes, DS90CF384AQMTX/NOPB can be used in video transmission systems.
Question: What is the operating temperature range for DS90CF384AQMTX/NOPB?
Answer: The operating temperature range for DS90CF384AQMTX/NOPB is -40°C to 85°C.
Question: Does DS90CF384AQMTX/NOPB support daisy-chaining for multiple devices?
Answer: Yes, DS90CF384AQMTX/NOPB supports daisy-chaining for multiple devices.
Question: Can DS90CF384AQMTX/NOPB be used in industrial control systems?
Answer: Yes, DS90CF384AQMTX/NOPB can be used in industrial control systems.