The DS90CR217MTDX/NOPB IC has a total of 56 pins. The pin configuration is as follows:
Pin Number | Pin Name | Description
-----------|----------|------------
1 | VCC | Power supply voltage
2 | VCC | Power supply voltage
3 | GND | Ground
4 | GND | Ground
5 | CLKIN | Input clock signal
6 | CLKP | Positive clock output
7 | CLKN | Negative clock output
8-31 | DATA[23:0]| Video data inputs
32 | DE | Data enable input
33 | HSYNC | Horizontal sync input
34 | VSYNC | Vertical sync input
35 | CLKSEL | Clock select input
36 | CLKOUT | Output clock signal
37-56 | NC | No connection
The DS90CR217MTDX/NOPB is a Serializer/Deserializer (SerDes) IC that converts parallel video data into a serial stream for transmission over a high-speed link. On the receiving end, it converts the serial data back into parallel format. This conversion process allows for efficient transmission of video signals over long distances while minimizing the number of required interconnects.
The DS90CR217MTDX/NOPB is commonly used in various video transmission applications, including:
For similar video transmission requirements, the following alternative models can be considered:
These alternative models offer different performance characteristics and can be chosen based on specific application requirements.
In conclusion, the DS90CR217MTDX/NOPB is a high-performance SerDes IC designed for video transmission applications. With its high-speed capabilities, color depth support, and low power consumption, it is well-suited for various video-related devices and systems.
What is the maximum data rate supported by DS90CR217MTDX/NOPB?
- The maximum data rate supported by DS90CR217MTDX/NOPB is 155 Mbps.
Can DS90CR217MTDX/NOPB be used for LVDS video transmission?
- Yes, DS90CR217MTDX/NOPB is suitable for LVDS video transmission applications.
What is the operating voltage range of DS90CR217MTDX/NOPB?
- The operating voltage range of DS90CR217MTDX/NOPB is 3.3V to 5V.
Does DS90CR217MTDX/NOPB support spread spectrum clocking?
- Yes, DS90CR217MTDX/NOPB supports spread spectrum clocking for reduced EMI.
Is DS90CR217MTDX/NOPB compatible with HDCP for secure video transmission?
- No, DS90CR217MTDX/NOPB does not have built-in HDCP support.
Can DS90CR217MTDX/NOPB be used in automotive applications?
- Yes, DS90CR217MTDX/NOPB is suitable for automotive applications within its specified temperature range.
What is the typical power consumption of DS90CR217MTDX/NOPB?
- The typical power consumption of DS90CR217MTDX/NOPB is 100mW per channel.
Does DS90CR217MTDX/NOPB support hot-plugging of cables?
- Yes, DS90CR217MTDX/NOPB supports hot-plugging of cables without damage to the device.
Is DS90CR217MTDX/NOPB compatible with standard FPD-Link interfaces?
- Yes, DS90CR217MTDX/NOPB is compatible with standard FPD-Link interfaces.
Can DS90CR217MTDX/NOPB be used in medical imaging equipment?
- Yes, DS90CR217MTDX/NOPB can be used in medical imaging equipment where LVDS signaling is required.