LP3470IM5X-4.8 belongs to the category of integrated circuits (ICs).
This product is commonly used as a voltage supervisor or reset circuit in various electronic devices.
LP3470IM5X-4.8 is available in a small SOT-23-5 package.
The essence of LP3470IM5X-4.8 lies in its ability to monitor and control the power supply voltage, ensuring proper functioning of the connected electronic device.
LP3470IM5X-4.8 is typically packaged in reels containing 3000 units.
LP3470IM5X-4.8 has five pins arranged as follows:
```
| | --| VDD | --| GND | --| MR | --| RESET | --| NC | |_______| ```
Pin Description: - VDD: Power supply input - GND: Ground reference - MR: Manual reset input (active-low) - RESET: Reset output - NC: No connection (unused pin)
LP3470IM5X-4.8 operates based on a voltage comparator circuit. It compares the supply voltage with the programmed threshold voltage. When the supply voltage drops below the threshold, the reset output is activated, indicating a power failure or unstable voltage condition. The reset output remains active until the supply voltage rises above the threshold or a manual reset signal is applied.
LP3470IM5X-4.8 finds applications in various electronic devices where reliable voltage monitoring and reset functionality are crucial. Some common application fields include:
These alternative models provide similar functionality but cater to different voltage requirements in various applications.
(Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of LP3470IM5X-4.8 in technical solutions:
Q: What is LP3470IM5X-4.8? A: LP3470IM5X-4.8 is a low-power voltage regulator IC that provides a fixed output voltage of 4.8V.
Q: What are the typical applications of LP3470IM5X-4.8? A: LP3470IM5X-4.8 is commonly used in battery-powered devices, portable electronics, and other low-power applications.
Q: What is the input voltage range for LP3470IM5X-4.8? A: The input voltage range for LP3470IM5X-4.8 is typically between 2.7V and 6V.
Q: What is the output current capability of LP3470IM5X-4.8? A: LP3470IM5X-4.8 can provide a maximum output current of 150mA.
Q: Does LP3470IM5X-4.8 have built-in protection features? A: Yes, LP3470IM5X-4.8 includes built-in features such as thermal shutdown and short-circuit protection.
Q: Can LP3470IM5X-4.8 operate in a wide temperature range? A: Yes, LP3470IM5X-4.8 is designed to operate in a temperature range of -40°C to +125°C.
Q: Is LP3470IM5X-4.8 suitable for low-power IoT devices? A: Yes, LP3470IM5X-4.8 is well-suited for low-power IoT devices due to its low quiescent current and small form factor.
Q: Can LP3470IM5X-4.8 be used in automotive applications? A: Yes, LP3470IM5X-4.8 is automotive-grade and can be used in automotive applications that require a 4.8V voltage regulator.
Q: Does LP3470IM5X-4.8 require any external components for operation? A: LP3470IM5X-4.8 requires only a few external components such as input/output capacitors for stable operation.
Q: Is LP3470IM5X-4.8 available in different package options? A: Yes, LP3470IM5X-4.8 is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronics.
Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.