Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
LP8725TLE-D/NOPB
Tingnan ang Detalye DataSheets

LP8725TLE-D/NOPB

Product Overview

Category

LP8725TLE-D/NOPB belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic devices.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent and thermal protection
  • Adjustable output voltage

Package

LP8725TLE-D/NOPB comes in a small package, suitable for surface mount applications.

Essence

The essence of LP8725TLE-D/NOPB lies in its ability to provide stable and regulated voltage to electronic components.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 6.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1.5A
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 60µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High efficiency conversion
  • Overcurrent and thermal protection
  • Adjustable output voltage through feedback pin
  • Enable/disable control through enable pin
  • Low dropout voltage for improved efficiency

Advantages

  • Wide input voltage range allows compatibility with various power sources
  • High efficiency conversion reduces power dissipation and extends battery life
  • Overcurrent and thermal protection ensure safe operation
  • Adjustable output voltage provides flexibility for different applications

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

LP8725TLE-D/NOPB operates by regulating the input voltage to a stable and adjustable output voltage. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage based on the reference voltage. The enable pin allows control over the device's operation, while overcurrent and thermal protection mechanisms ensure safe operation.

Detailed Application Field Plans

LP8725TLE-D/NOPB finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. LP8726TLE-D/NOPB
  2. LP8727TLE-D/NOPB
  3. LP8728TLE-D/NOPB
  4. LP8729TLE-D/NOPB
  5. LP8730TLE-D/NOPB

These alternative models offer similar functionality and characteristics, providing options for different voltage and current requirements.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng LP8725TLE-D/NOPB sa mga teknikal na solusyon

  1. What is the input voltage range for LP8725TLE-D/NOPB?
    - The input voltage range for LP8725TLE-D/NOPB is 2.7V to 5.5V.

  2. What is the typical output current capability of LP8725TLE-D/NOPB?
    - The typical output current capability of LP8725TLE-D/NOPB is 500mA.

  3. Can LP8725TLE-D/NOPB be used in battery-powered applications?
    - Yes, LP8725TLE-D/NOPB can be used in battery-powered applications due to its low input voltage range.

  4. What is the efficiency of LP8725TLE-D/NOPB?
    - The efficiency of LP8725TLE-D/NOPB is typically 95%.

  5. Is LP8725TLE-D/NOPB suitable for portable devices?
    - Yes, LP8725TLE-D/NOPB is suitable for portable devices due to its low power consumption and small form factor.

  6. Does LP8725TLE-D/NOPB have overcurrent protection?
    - Yes, LP8725TLE-D/NOPB has overcurrent protection to ensure safe operation.

  7. What is the operating temperature range of LP8725TLE-D/NOPB?
    - The operating temperature range of LP8725TLE-D/NOPB is -40°C to 85°C.

  8. Can LP8725TLE-D/NOPB be used in automotive applications?
    - Yes, LP8725TLE-D/NOPB can be used in automotive applications due to its wide input voltage range and robust design.

  9. Does LP8725TLE-D/NOPB require external components for operation?
    - LP8725TLE-D/NOPB requires minimal external components for operation, making it easy to integrate into designs.

  10. Is LP8725TLE-D/NOPB RoHS compliant?
    - Yes, LP8725TLE-D/NOPB is RoHS compliant, ensuring environmental friendliness in electronic designs.