Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
P82B715DRG4
Tingnan ang Detalye DataSheets

P82B715DRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Bus Extender
  • Characteristics: High-speed, bidirectional buffer for I2C bus signals
  • Package: SOIC-8
  • Essence: Extends the range of I2C bus signals while maintaining signal integrity
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: 2.3V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Data Rate: 400 kbps
  • Maximum Capacitive Load: 400 pF
  • RoHS Compliant: Yes

Detailed Pin Configuration

The P82B715DRG4 IC has a total of 8 pins arranged as follows:

  1. SDA (Serial Data Input/Output)
  2. SCL (Serial Clock Input)
  3. GND (Ground)
  4. VCC (Supply Voltage)
  5. NC (No Connection)
  6. NC (No Connection)
  7. NC (No Connection)
  8. EN (Enable Input)

Functional Features

  • Bidirectional buffering of I2C bus signals
  • Extends the range between I2C devices
  • Supports multiple devices on the same bus
  • Provides level shifting and voltage translation
  • Improves noise immunity and signal integrity

Advantages

  • Enables long-distance communication between I2C devices
  • Simplifies design by eliminating the need for additional components
  • Compatible with a wide range of I2C devices
  • Low power consumption
  • RoHS compliant, environmentally friendly

Disadvantages

  • Limited to a maximum data rate of 400 kbps
  • Requires careful consideration of capacitive load limitations
  • Not suitable for applications requiring higher data rates or larger capacitive loads

Working Principles

The P82B715DRG4 is a bidirectional buffer that extends the range of I2C bus signals. It operates by buffering and amplifying the SDA and SCL signals, allowing them to travel longer distances while maintaining signal integrity. The IC also provides level shifting and voltage translation, ensuring compatibility between devices operating at different voltage levels.

Detailed Application Field Plans

The P82B715DRG4 is commonly used in various applications where long-distance communication between I2C devices is required. Some typical application fields include:

  1. Industrial automation systems
  2. Automotive electronics
  3. Telecommunications equipment
  4. Medical devices
  5. Consumer electronics

Detailed and Complete Alternative Models

  • PCA9515A: Similar bidirectional I2C bus buffer with higher data rate capability
  • TCA980x: I2C bus repeater with multiple ports for extending bus length
  • LTC4316: I2C/SMBus multiplexer with level shifting capabilities

These alternative models offer similar functionality to the P82B715DRG4 and can be considered based on specific requirements and constraints.

Word count: 346 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng P82B715DRG4 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of P82B715DRG4 in technical solutions:

  1. Q: What is P82B715DRG4? A: P82B715DRG4 is a bus extender IC that provides bidirectional buffering, amplification, and filtering for I2C bus signals.

  2. Q: What is the purpose of using P82B715DRG4 in a technical solution? A: P82B715DRG4 helps extend the range of I2C bus communication by boosting signal strength and reducing noise interference.

  3. Q: Can P82B715DRG4 be used with any microcontroller or device? A: Yes, P82B715DRG4 is compatible with any microcontroller or device that supports I2C communication.

  4. Q: How does P82B715DRG4 achieve signal amplification and noise reduction? A: P82B715DRG4 uses a combination of voltage level shifting, current boosting, and filtering techniques to enhance the I2C bus signals.

  5. Q: What is the maximum distance that P82B715DRG4 can extend the I2C bus? A: P82B715DRG4 can extend the I2C bus up to 50 meters (164 feet) depending on the system configuration and cable quality.

  6. Q: Does P82B715DRG4 require external power supply? A: Yes, P82B715DRG4 requires an external power supply typically ranging from 2.7V to 5.5V.

  7. Q: Can multiple P82B715DRG4 devices be cascaded together? A: Yes, multiple P82B715DRG4 devices can be cascaded to further extend the I2C bus range.

  8. Q: Are there any specific design considerations when using P82B715DRG4? A: It is important to consider the capacitance and resistance of the I2C bus lines, as well as the power supply requirements of the connected devices.

  9. Q: Can P82B715DRG4 be used in industrial environments? A: Yes, P82B715DRG4 is suitable for industrial environments as it can operate over a wide temperature range and has ESD protection.

  10. Q: Where can I find more information about using P82B715DRG4 in technical solutions? A: You can refer to the datasheet and application notes provided by the manufacturer, as well as online forums and communities dedicated to I2C bus communication.