Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
PCI4510AZHK
Tingnan ang Detalye DataSheets

PCI4510AZHK

Overview

  • Category: Integrated Circuit
  • Use: Interface Controller
  • Characteristics: High-speed, low-power consumption
  • Package: QFP (Quad Flat Package)
  • Essence: Bridge between PCI bus and other peripheral devices
  • Packaging/Quantity: Tray, 250 units per tray

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 33 MHz
  • Data Bus Width: 32 bits
  • Power Consumption: 200 mW (typical)

Pin Configuration

The PCI4510AZHK has a total of 128 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. CLK
  4. AD[31:0]
  5. C/BE[3:0]
  6. FRAME#
  7. IRDY#
  8. TRDY#
  9. DEVSEL#
  10. STOP#

... (detailed pin configuration continues)

Functional Features

  • PCI Bus Master/Target Interface
  • Supports 3.3V signaling levels
  • Burst transfers up to 132 MB/s
  • Built-in DMA controller
  • Supports power management features

Advantages

  • High-speed data transfer
  • Low power consumption
  • Easy integration with various peripheral devices
  • Supports power management for energy efficiency

Disadvantages

  • Limited maximum clock frequency
  • Requires additional components for complete system integration
  • Not suitable for applications requiring higher data bandwidth

Working Principles

The PCI4510AZHK acts as an interface controller between the PCI bus and other peripheral devices. It facilitates high-speed data transfer between the host system and connected peripherals. The device incorporates a built-in DMA controller, which enables efficient data movement without burdening the host processor.

Application Field Plans

The PCI4510AZHK is commonly used in various applications, including:

  1. Laptop and desktop computers
  2. Embedded systems
  3. Industrial automation
  4. Networking equipment
  5. Communication devices

Alternative Models

  • PCI4510BZHK
  • PCI4510CZHK
  • PCI4510DZHK
  • PCI4510EZHK

These alternative models offer similar functionality but may have slight variations in specifications or package options.

In conclusion, the PCI4510AZHK is a high-speed interface controller designed for bridging the PCI bus and peripheral devices. With its low power consumption and versatile application field plans, it serves as a reliable solution for data transfer in various electronic systems.

Word count: 250

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng PCI4510AZHK sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of PCI4510AZHK in technical solutions:

  1. Q: What is the PCI4510AZHK? A: The PCI4510AZHK is a high-performance integrated circuit (IC) designed for use in PC Card/CardBus applications.

  2. Q: What are the key features of the PCI4510AZHK? A: The key features include support for both 3.3V and 5V signaling, compliance with the PC Card Standard 8.0 specification, and compatibility with various operating systems.

  3. Q: How can I interface the PCI4510AZHK with my system? A: The PCI4510AZHK interfaces with the host system through a PCI bus, providing a bridge between the PCI bus and the PC Card/CardBus slots.

  4. Q: Can the PCI4510AZHK support multiple PC Card/CardBus slots? A: Yes, the PCI4510AZHK supports up to two PC Card/CardBus slots, allowing for simultaneous operation of multiple cards.

  5. Q: What types of PC Cards/CardBus cards are compatible with the PCI4510AZHK? A: The PCI4510AZHK is compatible with a wide range of PC Cards and CardBus cards, including network adapters, wireless cards, modems, and storage devices.

  6. Q: Does the PCI4510AZHK require any external components? A: Yes, the PCI4510AZHK requires external components such as crystal oscillators, power supply decoupling capacitors, and pull-up resistors for proper operation.

  7. Q: What operating systems are supported by the PCI4510AZHK? A: The PCI4510AZHK is compatible with various operating systems, including Windows, Linux, and macOS.

  8. Q: Can the PCI4510AZHK be used in battery-powered devices? A: Yes, the PCI4510AZHK is designed to operate efficiently in battery-powered devices, offering power-saving features and low standby current consumption.

  9. Q: Are there any specific design considerations when using the PCI4510AZHK? A: Yes, some design considerations include proper signal integrity, layout guidelines, and adherence to the PC Card/CardBus specifications for optimal performance.

  10. Q: Where can I find more information about the PCI4510AZHK? A: You can refer to the datasheet and technical documentation provided by the manufacturer for detailed information on the PCI4510AZHK's specifications, application notes, and reference designs.

Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of the PCI4510AZHK in a technical solution.