Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN65MLVD047ADG4
Product Overview
- Category: Integrated Circuit (IC)
- Use: LVDS Driver
- Characteristics: High-speed, low-voltage differential signaling (LVDS) driver
- Package: 8-pin SOIC (Small Outline Integrated Circuit)
- Essence: Provides a high-speed interface for transmitting data over long distances with low power consumption
- Packaging/Quantity: Tape and reel, 2500 units per reel
Specifications
- Supply Voltage Range: 3V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Output Current: ±3.5mA
- Data Rate: Up to 400 Mbps
- Input Common Mode Voltage Range: -0.3V to 2.4V
- Output Voltage Swing: 350mV (minimum)
Detailed Pin Configuration
- VCC: Power supply pin (+3V to +3.6V)
- GND: Ground pin
- IN-: Non-inverting input pin
- IN+: Inverting input pin
- EN: Enable pin (active high)
- OUT-: Non-inverting output pin
- OUT+: Inverting output pin
- NC: No connection
Functional Features
- High-speed LVDS driver for point-to-point data transmission
- Low power consumption
- Wide operating temperature range for industrial applications
- Differential signaling reduces electromagnetic interference (EMI)
- Supports data rates up to 400 Mbps
- Enables long-distance data transmission with minimal signal degradation
Advantages
- High-speed data transmission capability
- Low power consumption
- Wide operating temperature range
- Reduced EMI due to differential signaling
- Compact package size for space-constrained applications
Disadvantages
- Limited output current capability
- Requires external components for proper operation
- Not suitable for applications requiring higher data rates
Working Principles
The SN65MLVD047ADG4 is a LVDS driver that utilizes differential signaling to transmit high-speed data over long distances. It operates on a supply voltage range of 3V to 3.6V and supports data rates up to 400 Mbps. The device accepts differential input signals and converts them into differential output signals with low voltage swing.
Detailed Application Field Plans
The SN65MLVD047ADG4 is commonly used in various applications, including:
- Industrial Automation: Used for transmitting control signals between PLCs (Programmable Logic Controllers) and I/O modules.
- Automotive Electronics: Employed in automotive infotainment systems for transmitting audio and video signals.
- Medical Equipment: Utilized in medical imaging devices for transmitting high-resolution image data.
- Communication Systems: Integrated into communication equipment for transmitting data between different network nodes.
Detailed and Complete Alternative Models
- SN65LVDS047: Similar LVDS driver with a different package (16-pin TSSOP).
- DS90LV047A: LVDS driver with similar specifications but a different manufacturer.
- MAX9127: Differential line driver with adjustable output current and slew rate control.
Note: This is not an exhaustive list, and there are other alternative models available in the market.
Word count: 439 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN65MLVD047ADG4 sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of SN65MLVD047ADG4 in technical solutions:
Q: What is SN65MLVD047ADG4?
A: SN65MLVD047ADG4 is a quad differential line driver/receiver designed for balanced transmission lines.
Q: What is the operating voltage range of SN65MLVD047ADG4?
A: The operating voltage range is typically between 3.3V and 5V.
Q: What is the maximum data rate supported by SN65MLVD047ADG4?
A: SN65MLVD047ADG4 supports a maximum data rate of 200 Mbps.
Q: Can SN65MLVD047ADG4 be used in industrial applications?
A: Yes, SN65MLVD047ADG4 is suitable for use in industrial applications due to its robustness and reliability.
Q: Does SN65MLVD047ADG4 support hot-plugging capability?
A: Yes, SN65MLVD047ADG4 has built-in hot-plugging protection to prevent damage during insertion or removal of cables.
Q: What is the output current drive capability of SN65MLVD047ADG4?
A: SN65MLVD047ADG4 can drive up to ±50 mA of output current.
Q: Can SN65MLVD047ADG4 be used in automotive applications?
A: Yes, SN65MLVD047ADG4 is automotive qualified and can be used in automotive systems.
Q: Is SN65MLVD047ADG4 compatible with LVDS signaling?
A: No, SN65MLVD047ADG4 is not compatible with LVDS signaling. It is designed for M-LVDS (Multipoint Low Voltage Differential Signaling) applications.
Q: What is the operating temperature range of SN65MLVD047ADG4?
A: SN65MLVD047ADG4 can operate within a temperature range of -40°C to +85°C.
Q: Can SN65MLVD047ADG4 be used in point-to-point communication systems?
A: Yes, SN65MLVD047ADG4 can be used in both multipoint and point-to-point communication systems.
Please note that these answers are general and may vary depending on specific application requirements.