Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74ABT374ANSR
Tingnan ang Detalye DataSheets

SN74ABT374ANSR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: High-speed, low-power consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: D-type transparent latch with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Output Drive Capability: ±24mA at 3.3V
  • Propagation Delay Time: 2.8ns (typical)

Detailed Pin Configuration

The SN74ABT374ANSR has a total of 20 pins. The pin configuration is as follows:

  1. D0 (Data input 0)
  2. D1 (Data input 1)
  3. D2 (Data input 2)
  4. D3 (Data input 3)
  5. D4 (Data input 4)
  6. D5 (Data input 5)
  7. D6 (Data input 6)
  8. D7 (Data input 7)
  9. GND (Ground)
  10. Q0 (Output 0)
  11. Q1 (Output 1)
  12. Q2 (Output 2)
  13. Q3 (Output 3)
  14. Q4 (Output 4)
  15. Q5 (Output 5)
  16. Q6 (Output 6)
  17. Q7 (Output 7)
  18. OE (Output Enable)
  19. CP (Clock Pulse)
  20. VCC (Supply Voltage)

Functional Features

The SN74ABT374ANSR is a D-type transparent latch with 3-state outputs. It has the following functional features:

  • High-speed operation: The flip-flop can operate at high clock frequencies, making it suitable for applications that require fast data storage and retrieval.
  • Low-power consumption: The IC is designed to minimize power consumption, making it energy-efficient and suitable for battery-powered devices.
  • 3-state outputs: The latch has 3-state outputs, allowing multiple devices to be connected to a common bus without interference.

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data processing. - Low-power consumption prolongs battery life in portable devices. - 3-state outputs facilitate bus sharing in complex systems.

Disadvantages: - Limited voltage range (4.5V to 5.5V) may restrict compatibility with certain applications. - Propagation delay time of 2.8ns may not be suitable for ultra-high-speed applications.

Working Principles

The SN74ABT374ANSR operates based on the principles of digital logic. When the clock pulse (CP) input is triggered, the data inputs (D0-D7) are latched and transferred to the corresponding outputs (Q0-Q7). The output enable (OE) signal controls whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The SN74ABT374ANSR can be used in various applications, including:

  1. Data storage and retrieval systems
  2. Address decoding circuits
  3. Bus interface units
  4. Memory modules
  5. Microprocessor-based systems

Detailed and Complete Alternative Models

Some alternative models to the SN74ABT374ANSR include:

  1. SN74ABT374ADW - SOIC package, wider temperature range (-55°C to +125°C)
  2. SN74ABT374APWR - TSSOP (Thin Shrink Small Outline Package) package, smaller footprint
  3. SN74ABT374DBR - SSOP (Shrink Small Outline Package) package, higher output drive capability

These alternative models offer similar functionality but may differ in package type, temperature range, or other specifications.

Word count: 410 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74ABT374ANSR sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74ABT374ANSR:

  1. Q: What is SN74ABT374ANSR? A: SN74ABT374ANSR is a type of integrated circuit (IC) known as an octal D-type flip-flop with 3-state outputs.

  2. Q: What is the purpose of SN74ABT374ANSR? A: SN74ABT374ANSR is used for storing and transferring data in digital systems. It can be used for various applications such as data synchronization, address decoding, and bus interfacing.

  3. Q: What is the operating voltage range of SN74ABT374ANSR? A: SN74ABT374ANSR operates within a voltage range of 4.5V to 5.5V.

  4. Q: How many flip-flops are there in SN74ABT374ANSR? A: SN74ABT374ANSR consists of 8 individual D-type flip-flops.

  5. Q: What is the maximum clock frequency supported by SN74ABT374ANSR? A: SN74ABT374ANSR can operate at a maximum clock frequency of 125 MHz.

  6. Q: Can SN74ABT374ANSR handle bidirectional data transfer? A: No, SN74ABT374ANSR only supports unidirectional data transfer.

  7. Q: What is the output drive capability of SN74ABT374ANSR? A: SN74ABT374ANSR has a typical output drive capability of ±24 mA.

  8. Q: Does SN74ABT374ANSR have any built-in protection features? A: Yes, SN74ABT374ANSR has built-in protection against electrostatic discharge (ESD) and latch-up.

  9. Q: Can SN74ABT374ANSR be used in high-speed applications? A: Yes, SN74ABT374ANSR is designed for high-speed operation and can be used in applications that require fast data transfer.

  10. Q: What package does SN74ABT374ANSR come in? A: SN74ABT374ANSR is available in a small-outline integrated circuit (SOIC) package with 20 pins.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of SN74ABT374ANSR.