Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74AHC374PW
Tingnan ang Detalye DataSheets

SN74AHC374PW

Product Overview

Category

SN74AHC374PW belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal storage and manipulation in digital electronic systems.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with various logic families

Package

SN74AHC374PW is available in a TSSOP (Thin Shrink Small Outline Package) package.

Essence

The essence of SN74AHC374PW lies in its ability to store and control digital signals efficiently.

Packaging/Quantity

SN74AHC374PW is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 2V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage High Level (VIH): 0.7 x VCC to VCC + 0.5V
  • Input Voltage Low Level (VIL): -0.5V to 0.3 x VCC
  • Output Voltage High Level (VOH): VCC - 0.5V
  • Output Voltage Low Level (VOL): 0.5V

Detailed Pin Configuration

SN74AHC374PW consists of 20 pins, each serving a specific function:

  1. Pin 1: Data Input D0
  2. Pin 2: Data Input D1
  3. Pin 3: Data Input D2
  4. Pin 4: Data Input D3
  5. Pin 5: Data Input D4
  6. Pin 6: Data Input D5
  7. Pin 7: Data Input D6
  8. Pin 8: Data Input D7
  9. Pin 9: Clock Input (CLK)
  10. Pin 10: Output Enable (OE)
  11. Pin 11: Data Output Q0
  12. Pin 12: Data Output Q1
  13. Pin 13: Data Output Q2
  14. Pin 14: Data Output Q3
  15. Pin 15: Data Output Q4
  16. Pin 16: Data Output Q5
  17. Pin 17: Data Output Q6
  18. Pin 18: Data Output Q7
  19. Pin 19: Ground (GND)
  20. Pin 20: Supply Voltage (VCC)

Functional Features

SN74AHC374PW offers the following functional features:

  • Octal D-type flip-flop with 3-state outputs
  • Positive-edge triggered clock input
  • Output enable control for disabling the outputs
  • High-speed operation for efficient signal storage and manipulation

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick data processing
  • Low power consumption helps in energy-efficient designs
  • Wide operating voltage range provides flexibility in various applications
  • Compatibility with different logic families enhances versatility

Disadvantages

  • Limited number of inputs and outputs restricts complex circuit designs
  • TSSOP package may require careful handling during assembly

Working Principles

SN74AHC374PW operates based on the principles of D-type flip-flops. It stores and transfers digital data using positive-edge triggered clock signals. The output enable control allows for enabling or disabling the outputs as required.

Detailed Application Field Plans

SN74AHC374PW finds extensive application in various digital electronic systems, including but not limited to: - Microcontrollers - Data storage devices - Communication systems - Industrial automation - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74AHC374PW include: - 74HC374 - CD74HCT374 - MC74ACT374

These models can be considered as alternatives based on specific requirements and compatibility with the existing system.

In conclusion, SN74AHC374PW is a versatile integrated circuit used for signal storage and manipulation in digital electronic systems. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for various applications. However, its limited number of inputs and outputs may restrict complex circuit designs. Alternative models such as 74HC374, CD74HCT374, and MC74ACT374 offer similar functionality and can be considered based on specific needs.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74AHC374PW sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74AHC374PW:

  1. Q: What is SN74AHC374PW? A: SN74AHC374PW is a type of octal D-type flip-flop integrated circuit (IC) that can store and transfer data in digital systems.

  2. Q: What is the purpose of SN74AHC374PW? A: SN74AHC374PW is commonly used for data storage, data transfer, and synchronization in various technical solutions.

  3. Q: What is the voltage range supported by SN74AHC374PW? A: SN74AHC374PW supports a wide voltage range from 2V to 5.5V, making it compatible with different power supply levels.

  4. Q: How many flip-flops are there in SN74AHC374PW? A: SN74AHC374PW contains 8 individual D-type flip-flops, allowing it to store and manipulate 8 bits of data simultaneously.

  5. Q: Can SN74AHC374PW be cascaded to increase the number of flip-flops? A: Yes, multiple SN74AHC374PW ICs can be cascaded together to increase the number of flip-flops and expand the data storage capacity.

  6. Q: What is the maximum clock frequency supported by SN74AHC374PW? A: SN74AHC374PW can operate at a maximum clock frequency of 100 MHz, enabling high-speed data processing.

  7. Q: Is SN74AHC374PW compatible with both TTL and CMOS logic levels? A: Yes, SN74AHC374PW is designed to be compatible with both TTL and CMOS logic levels, providing flexibility in system integration.

  8. Q: Can SN74AHC374PW be used in both parallel and serial data transfer applications? A: Yes, SN74AHC374PW can be configured to support both parallel and serial data transfer, depending on the system requirements.

  9. Q: Does SN74AHC374PW have any built-in output enable functionality? A: Yes, SN74AHC374PW has a built-in output enable pin that allows for easy control of the output state of the flip-flops.

  10. Q: What are some typical applications of SN74AHC374PW? A: SN74AHC374PW is commonly used in applications such as data registers, address latches, bus drivers, and general-purpose storage elements.

Please note that these answers are general and may vary depending on specific use cases and design considerations.