The SN74AHCT74QDRG4Q1 has a total of 14 pins:
The SN74AHCT74QDRG4Q1 is a dual D-type positive-edge-triggered flip-flop. It operates at high speed while consuming low power. The flip-flop has a clear input (CLR) and a preset input (PRE) for initialization purposes. The clock input (CLK) triggers the flip-flop to capture and store the data input (D). The complementary outputs (Q and Q̅) provide the inverted and non-inverted versions of the stored data.
Advantages: - High-speed operation - Low power consumption - Dual flip-flop configuration - Clear and preset inputs for initialization
Disadvantages: - Limited operating frequency (up to 100MHz) - Restricted voltage range (2V to 5.5V)
The SN74AHCT74QDRG4Q1 operates based on positive-edge triggering. When the clock input (CLK) transitions from LOW to HIGH, the flip-flop captures and stores the data input (D). The stored data is then available at the complementary outputs (Q and Q̅). The clear input (CLR) and preset input (PRE) allow for initialization of the flip-flop's state.
The SN74AHCT74QDRG4Q1 can be used in various applications, including but not limited to: - Digital communication systems - Microcontrollers and microprocessors - Data storage devices - Clock synchronization circuits - Control systems
Some alternative models that can be considered as replacements for the SN74AHCT74QDRG4Q1 are: - CD4013BCN - Dual D-Type Flip-Flop - MC74HC74AN - Dual D Flip-Flop - 74LS74 - Dual D Flip-Flop with Preset and Clear
These alternative models offer similar functionality and can be used as drop-in replacements in many applications.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of SN74AHCT74QDRG4Q1 in technical solutions:
1. What is the SN74AHCT74QDRG4Q1? - The SN74AHCT74QDRG4Q1 is a dual positive-edge-triggered D-type flip-flop with clear and preset, designed for automotive applications.
2. What is the operating voltage range of SN74AHCT74QDRG4Q1? - The operating voltage range of SN74AHCT74QDRG4Q1 is from 2 V to 5.5 V.
3. What is the maximum clock frequency supported by SN74AHCT74QDRG4Q1? - The maximum clock frequency supported by SN74AHCT74QDRG4Q1 is 24 MHz.
4. How many flip-flops are there in SN74AHCT74QDRG4Q1? - SN74AHCT74QDRG4Q1 consists of two independent flip-flops.
5. What is the output drive capability of SN74AHCT74QDRG4Q1? - The output drive capability of SN74AHCT74QDRG4Q1 is 8 mA at 5 V.
6. Can SN74AHCT74QDRG4Q1 be used in automotive applications? - Yes, SN74AHCT74QDRG4Q1 is specifically designed for automotive applications and meets the AEC-Q100 Grade 1 qualification requirements.
7. Does SN74AHCT74QDRG4Q1 have a power-down mode? - No, SN74AHCT74QDRG4Q1 does not have a power-down mode.
8. What is the propagation delay of SN74AHCT74QDRG4Q1? - The propagation delay of SN74AHCT74QDRG4Q1 is typically 8 ns.
9. Can SN74AHCT74QDRG4Q1 be used in high-speed applications? - Yes, SN74AHCT74QDRG4Q1 can be used in high-speed applications with a maximum clock frequency of 24 MHz.
10. Is SN74AHCT74QDRG4Q1 available in different package options? - Yes, SN74AHCT74QDRG4Q1 is available in various package options, including SOIC-14 and TSSOP-14.
Please note that these answers are based on general information about SN74AHCT74QDRG4Q1. For specific details, it's always recommended to refer to the datasheet or consult the manufacturer.