Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74AUP1T04DCKR
Product Overview
Category
SN74AUP1T04DCKR belongs to the category of integrated circuits (ICs).
Use
This product is commonly used as a logic gate, specifically an inverter. It is designed to convert input signals into their complementary outputs.
Characteristics
- Low power consumption
- High-speed operation
- Wide operating voltage range
- Small package size
- RoHS compliant
Package
SN74AUP1T04DCKR is available in a small SOT-353 package.
Essence
The essence of SN74AUP1T04DCKR lies in its ability to perform logical inversion on input signals, making it a crucial component in digital systems.
Packaging/Quantity
This product is typically packaged in reels, with 3000 units per reel.
Specifications
- Supply Voltage Range: 0.8V to 3.6V
- Input Voltage Range: 0V to VCC
- Output Voltage Range: 0V to VCC
- Operating Temperature Range: -40°C to +85°C
- Propagation Delay Time: 2.5ns (typical)
- Maximum Quiescent Current: 10μA
Detailed Pin Configuration
SN74AUP1T04DCKR has the following pin configuration:
____
VCC| |
GND| |
IN | |
OUT|____|
Functional Features
- Single-channel logic inverter
- High-speed operation for efficient signal processing
- Wide operating voltage range allows compatibility with various systems
- Low power consumption for energy-efficient applications
Advantages and Disadvantages
Advantages
- Low power consumption makes it suitable for battery-powered devices
- Small package size saves board space
- RoHS compliance ensures environmental friendliness
Disadvantages
- Limited functionality as it only performs logical inversion
- Not suitable for applications requiring complex logic operations
Working Principles
SN74AUP1T04DCKR operates based on the principles of complementary metal-oxide-semiconductor (CMOS) technology. It utilizes a combination of p-type and n-type transistors to achieve logical inversion.
Detailed Application Field Plans
SN74AUP1T04DCKR finds applications in various digital systems, including but not limited to: - Microcontrollers - Data communication devices - Consumer electronics - Automotive electronics - Industrial automation
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to SN74AUP1T04DCKR are: - SN74LVC1G04DBVR - SN74HC04N - SN74LV1T04DBVR - SN74AHC1G04DBVR
These models offer similar functionality and characteristics, providing flexibility in design choices.
Word count: 314 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74AUP1T04DCKR sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of SN74AUP1T04DCKR in technical solutions:
Q1: What is SN74AUP1T04DCKR? A1: SN74AUP1T04DCKR is a single-gate buffer/driver IC (Integrated Circuit) that can be used for level shifting, signal buffering, and driving capacitive loads.
Q2: What is the voltage range supported by SN74AUP1T04DCKR? A2: SN74AUP1T04DCKR supports a wide voltage range from 0.8V to 3.6V.
Q3: Can SN74AUP1T04DCKR be used for bidirectional level shifting? A3: No, SN74AUP1T04DCKR is a unidirectional buffer/driver and cannot be used for bidirectional level shifting.
Q4: What is the maximum output current of SN74AUP1T04DCKR? A4: The maximum output current of SN74AUP1T04DCKR is typically around 32mA.
Q5: Can SN74AUP1T04DCKR drive capacitive loads? A5: Yes, SN74AUP1T04DCKR can drive capacitive loads up to a certain limit. However, it is recommended to use an external series resistor to limit the current during charging and discharging of the capacitive load.
Q6: Is SN74AUP1T04DCKR suitable for high-speed applications? A6: Yes, SN74AUP1T04DCKR is designed for high-speed operation and can be used in various high-frequency applications.
Q7: Can SN74AUP1T04DCKR be used in battery-powered devices? A7: Yes, SN74AUP1T04DCKR operates at low power and can be used in battery-powered devices.
Q8: What is the package type of SN74AUP1T04DCKR? A8: SN74AUP1T04DCKR is available in a small SOT-353 package.
Q9: Can SN74AUP1T04DCKR tolerate overvoltage conditions? A9: No, SN74AUP1T04DCKR is not designed to tolerate overvoltage conditions. It is recommended to use external protection circuitry if there is a possibility of overvoltage.
Q10: What are some typical applications of SN74AUP1T04DCKR? A10: Some typical applications of SN74AUP1T04DCKR include level shifting between different voltage domains, buffering signals in digital systems, driving capacitive loads in communication interfaces, and voltage translation in mixed-signal designs.
Please note that these answers are general and may vary depending on specific design requirements and application scenarios.