The SN74AUP1T58DBVR has the following pin configuration:
The SN74AUP1T58DBVR is a single Schmitt-trigger buffer/driver integrated circuit. It operates by receiving an input signal (A) and producing a corresponding output signal (Y). The Schmitt-trigger input provides noise immunity by ensuring that the output transitions occur at different voltage levels for rising and falling input signals. This prevents false triggering caused by noisy or slow-changing input signals.
The SN74AUP1T58DBVR is commonly used in various applications, including:
These alternative models offer similar functionality and characteristics to the SN74AUP1T58DBVR, providing options for different design requirements.
In conclusion, the SN74AUP1T58DBVR is a single Schmitt-trigger buffer/driver integrated circuit that offers excellent noise immunity, high-speed operation, and low power consumption. It is commonly used in battery-powered devices, communication systems, industrial automation, and automotive electronics. Designers can also consider alternative models with similar features for their specific application needs.
Sure! Here are 10 common questions and answers related to the application of SN74AUP1T58DBVR in technical solutions:
Q1: What is the SN74AUP1T58DBVR? A1: The SN74AUP1T58DBVR is a single-bit dual-supply bus switch with configurable voltage translation and integrated pull-up resistors.
Q2: What is the voltage range supported by SN74AUP1T58DBVR? A2: The SN74AUP1T58DBVR supports a voltage range from 0.8V to 3.6V.
Q3: Can the SN74AUP1T58DBVR be used for level shifting between different voltage domains? A3: Yes, the SN74AUP1T58DBVR can be used for level shifting between voltage domains due to its configurable voltage translation feature.
Q4: How many channels does the SN74AUP1T58DBVR have? A4: The SN74AUP1T58DBVR has a single channel.
Q5: What is the maximum data rate supported by the SN74AUP1T58DBVR? A5: The SN74AUP1T58DBVR supports a maximum data rate of 100 Mbps.
Q6: Does the SN74AUP1T58DBVR have integrated pull-up resistors? A6: Yes, the SN74AUP1T58DBVR has integrated pull-up resistors which simplify the design by eliminating the need for external resistors.
Q7: Can the SN74AUP1T58DBVR be used in battery-powered applications? A7: Yes, the SN74AUP1T58DBVR can be used in battery-powered applications as it supports low power consumption.
Q8: What is the package type of SN74AUP1T58DBVR? A8: The SN74AUP1T58DBVR comes in a small SOT-23 package.
Q9: Can the SN74AUP1T58DBVR be used for bidirectional level shifting? A9: No, the SN74AUP1T58DBVR is a unidirectional bus switch and does not support bidirectional level shifting.
Q10: Are there any application notes or reference designs available for the SN74AUP1T58DBVR? A10: Yes, Texas Instruments provides application notes and reference designs for the SN74AUP1T58DBVR on their website, which can be helpful in designing with this device.
Please note that these answers are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and consult the manufacturer for detailed information.