Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74LV138APWRE4
Tingnan ang Detalye DataSheets

SN74LV138APWRE4

Overview

  • Category: Integrated Circuit
  • Use: Decoder/Demultiplexer
  • Characteristics:
    • Low-voltage operation
    • High-speed performance
    • Wide operating temperature range
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: Logic device for decoding and demultiplexing signals
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Operating Frequency: 125 MHz
  • Number of Outputs: 8
  • Number of Inputs: 3
  • Propagation Delay: 6 ns (typical)

Pin Configuration

The SN74LV138APWRE4 has a total of 16 pins. The pin configuration is as follows:

+---+--+---+ A2 |1 +--+ 16| VCC A1 |2 | Y0 A0 |3 | Y1 /G1 |4 | Y2 /G2A |5 | Y3 /G2B |6 | Y4 Y7 |7 | GND Y6 |8 | E1 Y5 |9 | E2 /Y0 |10 | /G2 /Y1 |11 | /G1 /Y2 |12 | A0 /Y3 |13 | A1 /Y4 |14 | A2 GND |15 | /Y7 +----------+

Functional Features

The SN74LV138APWRE4 is a decoder/demultiplexer integrated circuit that takes three binary inputs (A2, A1, and A0) and selects one of the eight outputs (Y0 to Y7) based on the input combination. It has two enable inputs (/G1 and /G2) which control the operation of the device.

Advantages and Disadvantages

Advantages: - Low-voltage operation allows for compatibility with various systems - High-speed performance enables quick signal decoding - Wide operating temperature range ensures reliable operation in different environments

Disadvantages: - Limited number of inputs and outputs restricts its application in complex systems - Propagation delay may affect real-time applications

Working Principles

The SN74LV138APWRE4 works by decoding the binary input signals (A2, A1, and A0) and selecting the corresponding output line based on the input combination. The enable inputs (/G1 and /G2) control the operation of the device. When both enable inputs are active low, the decoder is enabled, and the selected output line is determined by the input values.

Detailed Application Field Plans

The SN74LV138APWRE4 can be used in various applications, including but not limited to: - Address decoding in microcontrollers and microprocessors - Memory selection in digital systems - Data routing in communication systems - Signal demultiplexing in multimedia devices

Alternative Models

Here are some alternative models that provide similar functionality to the SN74LV138APWRE4:

  1. CD74HC138E: High-Speed CMOS Logic Decoder/Demultiplexer
  2. MC14532B: BCD-to-Seven Segment Latch/Decoder/Driver
  3. 74HCT138: 3-to-8 Line Decoder/Demultiplexer

These alternative models offer comparable features and can be used as substitutes depending on specific requirements.

In conclusion, the SN74LV138APWRE4 is a decoder/demultiplexer integrated circuit with low-voltage operation, high-speed performance, and wide operating temperature range. It is commonly used in various digital systems for address decoding, memory selection, and signal demultiplexing.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74LV138APWRE4 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74LV138APWRE4 in technical solutions:

  1. Q: What is SN74LV138APWRE4? A: SN74LV138APWRE4 is a 3-to-8 line decoder/demultiplexer integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What is the purpose of SN74LV138APWRE4? A: SN74LV138APWRE4 is used to decode binary information from a microcontroller or other digital device into multiple output lines.

  3. Q: How many input lines does SN74LV138APWRE4 have? A: SN74LV138APWRE4 has three input lines (A0, A1, and A2) that can be used to select one of eight outputs.

  4. Q: What is the maximum voltage rating for SN74LV138APWRE4? A: The maximum voltage rating for SN74LV138APWRE4 is 5.5V.

  5. Q: Can SN74LV138APWRE4 be used with both TTL and CMOS logic levels? A: Yes, SN74LV138APWRE4 is compatible with both TTL and CMOS logic levels.

  6. Q: What is the maximum output current of SN74LV138APWRE4? A: The maximum output current of SN74LV138APWRE4 is 24mA.

  7. Q: Can SN74LV138APWRE4 be used as a demultiplexer? A: Yes, SN74LV138APWRE4 can be used as a demultiplexer by connecting its inputs to the desired output lines.

  8. Q: Does SN74LV138APWRE4 have any built-in protection features? A: Yes, SN74LV138APWRE4 has built-in ESD (electrostatic discharge) protection to prevent damage from static electricity.

  9. Q: What is the operating temperature range for SN74LV138APWRE4? A: The operating temperature range for SN74LV138APWRE4 is -40°C to 85°C.

  10. Q: Can SN74LV138APWRE4 be used in automotive applications? A: Yes, SN74LV138APWRE4 is qualified for automotive applications and meets the AEC-Q100 standard.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.