SN74LV595AIPWREP

Product Overview

Category

SN74LV595AIPWREP belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial-in, parallel-out shift register applications.

Characteristics

• Low-voltage operation: The SN74LV595AIPWREP operates at a low voltage, making it suitable for various low-power applications.
• High-speed performance: It offers fast data transfer rates, enabling efficient data processing.
• Serial-to-parallel conversion: This IC facilitates the conversion of serial data into parallel output, allowing for easy interfacing with other devices.
• Wide operating temperature range: The SN74LV595AIPWREP can operate reliably across a wide temperature range, making it suitable for diverse environments.

Package

The SN74LV595AIPWREP is available in a small-outline integrated circuit (SOIC) package. This package provides compactness and ease of integration into electronic systems.

Essence

The essence of SN74LV595AIPWREP lies in its ability to efficiently convert serial data into parallel output, enabling seamless communication between different components within an electronic system.

Packaging/Quantity

The SN74LV595AIPWREP is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer and supplier.

Specifications

• Supply Voltage: 2V to 5.5V
• Operating Temperature Range: -40°C to 85°C
• Number of Outputs: 8
• Data Rate: Up to 100 MHz
• Package Type: SOIC-16

Detailed Pin Configuration

The SN74LV595AIPWREP has a total of 16 pins, which are assigned specific functions as follows:

1. SER (Serial Data Input)
2. RCLK (Register Clock Input)
3. SRCLK (Shift Register Clock Input)
4. OE (Output Enable Input)
5. GND (Ground)
6. QH' (Serial Output)
7. QH (Serial Output)
8. QA (Parallel Output A)
9. QB (Parallel Output B)
10. QC (Parallel Output C)
11. QD (Parallel Output D)
12. QE (Parallel Output E)
13. QF (Parallel Output F)
14. QG (Parallel Output G)
15. QH (Parallel Output H)
16. VCC (Supply Voltage)

Functional Features

• Serial-to-parallel conversion: The SN74LV595AIPWREP efficiently converts serial data into parallel output, allowing for easy interfacing with other devices.
• Cascadable: Multiple SN74LV595AIPWREP ICs can be cascaded to expand the number of outputs, providing flexibility in system design.
• Output enable control: The OE pin allows for enabling or disabling the outputs, providing additional control over the device's functionality.
• High-speed operation: With a maximum data rate of 100 MHz, this IC ensures fast and efficient data processing.

Advantages and Disadvantages

Advantages

• Low-voltage operation makes it suitable for low-power applications.
• Compact SOIC package enables easy integration into electronic systems.
• Wide operating temperature range ensures reliability in diverse environments.
• High-speed performance allows for efficient data transfer.

Disadvantages

• Limited number of outputs (8) may not be sufficient for certain applications requiring a higher number of parallel outputs.
• Lack of built-in protection features against voltage spikes or ESD events may require additional external circuitry for robustness.

Working Principles

The SN74LV595AIPWREP operates based on the principle of shift registers. It receives serial data through the SER pin and shifts it through the internal shift register upon each rising edge of the SRCLK input. The RCLK input latches the data from the shift register into the output latch, which can then be accessed in parallel through the eight output pins (QA to QH). The OE pin allows for enabling or disabling the outputs as required.

Detailed Application Field Plans

The SN74LV595AIPWREP finds applications in various fields, including but not limited to:

1. LED matrix displays: It can be used to control multiple LEDs in a matrix configuration, allowing for dynamic and programmable lighting effects.
2. Data storage systems: The IC's serial-to-parallel conversion capability makes it suitable for use in data storage systems where efficient data transfer is crucial.
3. Industrial automation: It can be employed in industrial automation systems for controlling and monitoring multiple devices simultaneously.
4. Communication equipment: The SN74LV595AIPWREP can be utilized in communication equipment to facilitate data routing and switching operations.

Detailed and Complete Alternative Models

1. 74HC595: This is a similar IC with comparable functionality, operating at a higher voltage range.