Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74LVC138ADBRE4
Tingnan ang Detalye DataSheets

SN74LVC138ADBRE4

Product Overview

Category

SN74LVC138ADBRE4 belongs to the category of digital integrated circuits.

Use

It is commonly used as a 3-to-8 line decoder/demultiplexer in various electronic applications.

Characteristics

  • Low-voltage CMOS technology
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • ESD protection on all inputs and outputs

Package

SN74LVC138ADBRE4 is available in a small-sized package, typically a 16-pin TSSOP (Thin Shrink Small Outline Package).

Essence

The essence of SN74LVC138ADBRE4 lies in its ability to decode a 3-bit binary input into one of eight mutually exclusive outputs.

Packaging/Quantity

SN74LVC138ADBRE4 is usually packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • Input Voltage: 0V to VCC
  • Output Voltage: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 3.6 ns (typical)
  • Output Current: ±24 mA

Detailed Pin Configuration

SN74LVC138ADBRE4 has a total of 16 pins, each serving a specific purpose:

  1. GND: Ground reference for the circuit.
  2. A0, A1, A2: Binary input lines for decoding.
  3. Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7: Output lines representing the decoded binary input.
  4. E1, E2: Enable inputs for controlling the decoder operation.
  5. VCC: Positive power supply voltage.

Functional Features

  • Decodes a 3-bit binary input into one of eight output lines.
  • Enables cascading multiple decoders for larger decoding capabilities.
  • Provides active-low enable inputs for easy control of the decoder operation.
  • Offers Schmitt-trigger inputs for improved noise immunity.
  • Supports a wide range of operating voltages, making it compatible with various systems.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick decoding of input signals.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide operating voltage range enhances compatibility with different systems.
  • ESD protection on all inputs and outputs improves reliability.

Disadvantages

  • Limited to 3-bit binary input decoding, not suitable for higher bit counts.
  • May require additional components for specific applications, such as pull-up resistors.

Working Principles

SN74LVC138ADBRE4 operates based on the principle of digital decoding. It takes a 3-bit binary input and activates the corresponding output line based on the input combination. The enable inputs (E1 and E2) control the decoder's operation, allowing the user to enable or disable the decoding process as needed.

Detailed Application Field Plans

SN74LVC138ADBRE4 finds applications in various fields, including but not limited to:

  1. Address decoding in microcontrollers and microprocessors.
  2. Memory selection in RAM and ROM systems.
  3. Data routing and multiplexing in communication systems.
  4. Control signal generation in industrial automation.
  5. Display panel selection in digital signage.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74LVC138ADBRE4 include:

  1. CD74HC238E: 3-to-8 line decoder/demultiplexer from Texas Instruments.
  2. MC74HC138AN: High-speed CMOS decoder/demultiplexer from ON Semiconductor.
  3. 74HCT138N: 3-to-8 line decoder/demultiplexer from NXP Semiconductors.

These alternative models can be considered based on specific requirements and availability in the market.

Word count: 529 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74LVC138ADBRE4 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74LVC138ADBRE4:

  1. Q: What is SN74LVC138ADBRE4? A: SN74LVC138ADBRE4 is a 3-to-8 line decoder/demultiplexer integrated circuit (IC) manufactured by Texas Instruments.

  2. Q: What is the purpose of SN74LVC138ADBRE4? A: SN74LVC138ADBRE4 is used to decode binary information from a microcontroller or other digital devices into separate output lines for driving various components or subsystems.

  3. Q: What is the maximum operating voltage for SN74LVC138ADBRE4? A: The maximum operating voltage for SN74LVC138ADBRE4 is 3.6V.

  4. Q: How many input lines does SN74LVC138ADBRE4 have? A: SN74LVC138ADBRE4 has three input lines (A0, A1, and A2) that can be used to select one of the eight output lines.

  5. Q: What is the output current capability of SN74LVC138ADBRE4? A: SN74LVC138ADBRE4 has a typical output current capability of 24mA per output.

  6. Q: Can SN74LVC138ADBRE4 be used with both TTL and CMOS logic levels? A: Yes, SN74LVC138ADBRE4 is compatible with both TTL and CMOS logic levels, making it versatile for use in various applications.

  7. Q: Does SN74LVC138ADBRE4 have any built-in protection features? A: Yes, SN74LVC138ADBRE4 has built-in ESD protection on all inputs and outputs, which helps to safeguard against electrostatic discharge.

  8. Q: What is the typical propagation delay of SN74LVC138ADBRE4? A: The typical propagation delay of SN74LVC138ADBRE4 is around 3.5ns.

  9. Q: Can SN74LVC138ADBRE4 be cascaded to increase the number of output lines? A: Yes, multiple SN74LVC138ADBRE4 ICs can be cascaded together to increase the number of output lines beyond eight.

  10. Q: What are some common applications of SN74LVC138ADBRE4? A: SN74LVC138ADBRE4 is commonly used in address decoding, memory selection, data routing, and general-purpose digital logic applications.

Please note that these answers are general and may vary depending on specific design considerations and requirements.