Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74LVC373APWR
Tingnan ang Detalye DataSheets

SN74LVC373APWR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Octal Transparent D-Type Latches with 3-State Outputs
  • Characteristics:
    • High-speed CMOS technology
    • Low power consumption
    • 3-state outputs for bus-oriented applications
    • Wide operating voltage range
    • Schmitt-trigger inputs for noise immunity
  • Package: TSSOP (Thin Shrink Small Outline Package)
  • Essence: The SN74LVC373APWR is a latch IC that can store and output data in an 8-bit format. It is commonly used in digital systems where data needs to be temporarily stored and transferred.
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 2.7ns (typical)
  • Output Current: ±24mA

Detailed Pin Configuration

The SN74LVC373APWR has a total of 20 pins. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: GND (Ground)
  11. Pin 11: Data Output (Q0)
  12. Pin 12: Data Output (Q1)
  13. Pin 13: Data Output (Q2)
  14. Pin 14: Data Output (Q3)
  15. Pin 15: Data Output (Q4)
  16. Pin 16: Data Output (Q5)
  17. Pin 17: Data Output (Q6)
  18. Pin 18: Data Output (Q7)
  19. Pin 19: Output Enable (OE*)
  20. Pin 20: VCC (Supply Voltage)

Functional Features

  • Octal transparent D-type latches with 3-state outputs
  • Non-inverting outputs for direct interface with microcontrollers and other digital logic devices
  • Output enable input allows the outputs to be disabled, putting them in a high-impedance state
  • Schmitt-trigger inputs provide improved noise immunity

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Wide operating voltage range - Noise immunity due to Schmitt-trigger inputs - 3-state outputs for bus-oriented applications

Disadvantages: - Limited output current capacity - Not suitable for high-voltage applications

Working Principles

The SN74LVC373APWR operates as an octal transparent latch. When the output enable (OE) input is low, the latch is transparent, allowing the data inputs to pass through to the outputs. When OE is high, the latch holds the last data input values and the outputs are in a high-impedance state.

Detailed Application Field Plans

The SN74LVC373APWR is widely used in various digital systems, including but not limited to: - Microcontroller-based systems - Data storage and transfer systems - Address and data buses in computer systems - Communication systems - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the SN74LVC373APWR include: - 74HC373: Octal D-type transparent latch with 3-state outputs - CD74HCT373: High-speed CMOS logic octal transparent latch - MC74LVX373: Low-voltage CMOS octal D-type latch

These alternative models offer similar functionality and can be used as replacements for the SN74LVC373APWR in various applications.

Word count: 511 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74LVC373APWR sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74LVC373APWR:

  1. Q: What is SN74LVC373APWR? A: SN74LVC373APWR is a octal transparent D-type latch with 3-state outputs, commonly used in digital systems.

  2. Q: What is the operating voltage range for SN74LVC373APWR? A: The operating voltage range for SN74LVC373APWR is typically between 1.65V and 5.5V.

  3. Q: What is the maximum output current that SN74LVC373APWR can handle? A: SN74LVC373APWR can handle a maximum output current of 32mA per output.

  4. Q: Can SN74LVC373APWR be used for level shifting applications? A: Yes, SN74LVC373APWR can be used for level shifting as it supports both 3.3V and 5V logic levels.

  5. Q: How many inputs and outputs does SN74LVC373APWR have? A: SN74LVC373APWR has 8 inputs and 8 outputs.

  6. Q: What is the propagation delay of SN74LVC373APWR? A: The propagation delay of SN74LVC373APWR is typically around 3.9ns.

  7. Q: Can SN74LVC373APWR be used in high-speed applications? A: Yes, SN74LVC373APWR is designed for high-speed operation and can be used in such applications.

  8. Q: Does SN74LVC373APWR have built-in protection features? A: Yes, SN74LVC373APWR has built-in ESD protection and can withstand electrostatic discharges.

  9. Q: Can SN74LVC373APWR be used in both parallel and serial data transfer applications? A: Yes, SN74LVC373APWR can be used in both parallel and serial data transfer applications.

  10. Q: What is the package type for SN74LVC373APWR? A: SN74LVC373APWR comes in a TSSOP-20 package.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.