Texas Instruments
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
SN74TVC3010DBQRG4
Tingnan ang Detalye DataSheets

SN74TVC3010DBQRG4

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Level Shifter
  • Characteristics: Bi-directional voltage level translator with automatic direction sensing
  • Package: SSOP-16
  • Essence: Translates signals between different voltage levels in electronic circuits
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range (VREF): 0.7V to VCCA + 0.5V
  • Output Voltage Range (VREF): 0.7V to VCCB + 0.5V
  • High-Level Input Voltage (VIH): 0.7V to VCCA + 0.5V
  • Low-Level Input Voltage (VIL): -0.5V to 0.3V
  • High-Level Output Voltage (VOH): VCCB - 0.4V
  • Low-Level Output Voltage (VOL): 0.4V
  • Maximum Operating Frequency: 100 MHz

Detailed Pin Configuration

The SN74TVC3010DBQRG4 has a total of 16 pins arranged as follows:

  1. OE (Output Enable)
  2. A1 (Channel A Data Input/Output)
  3. A2 (Channel A Data Input/Output)
  4. GND (Ground)
  5. B1 (Channel B Data Input/Output)
  6. B2 (Channel B Data Input/Output)
  7. VCCA (Channel A Supply Voltage)
  8. VCCB (Channel B Supply Voltage)
  9. VREF (Reference Voltage)
  10. DIR (Direction Control)
  11. NC (No Connection)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. VCC (Supply Voltage)

Functional Features

  • Bi-directional voltage level translation between two different voltage domains
  • Automatic direction sensing eliminates the need for a separate control signal
  • Supports bidirectional communication between devices operating at different voltage levels
  • Wide supply voltage range allows compatibility with various systems
  • High-speed operation up to 100 MHz enables efficient data transfer

Advantages and Disadvantages

Advantages: - Simplifies interfacing between devices with different voltage requirements - Automatic direction sensing reduces complexity in system design - Wide supply voltage range enhances versatility - High-speed operation ensures efficient data transmission

Disadvantages: - Limited to voltage level translation and does not provide other functionalities - Requires careful consideration of input and output voltage ranges to avoid signal distortion - May not be suitable for applications requiring very high-frequency operation

Working Principles

The SN74TVC3010DBQRG4 is a bi-directional voltage level shifter that translates signals between two different voltage domains. It operates based on the voltage difference between the VCCA and VCCB supply voltages. The DIR pin determines the direction of translation, automatically sensing the direction of the signal flow.

When the DIR pin is set to logic low, the device translates signals from Channel A (VCCA) to Channel B (VCCB). Conversely, when the DIR pin is set to logic high, the translation occurs from Channel B to Channel A. This automatic direction sensing simplifies the control circuitry required for bidirectional communication.

Detailed Application Field Plans

The SN74TVC3010DBQRG4 finds applications in various electronic systems where voltage level translation is necessary. Some potential application fields include:

  1. Microcontroller Interfaces: Facilitates communication between microcontrollers operating at different voltage levels.
  2. Sensor Networks: Enables connectivity between sensors and microcontrollers with varying voltage requirements.
  3. Display Systems: Allows interfacing between display modules and control circuits operating at different voltages.
  4. Industrial Automation: Supports communication between different subsystems in industrial automation systems.
  5. IoT Devices: Enables connectivity between IoT devices with different voltage levels, enhancing interoperability.

Detailed and Complete Alternative Models

  1. SN74LVC1T45DBVRG4: Unidirectional voltage level translator with automatic direction sensing. Package: SOT-23-6.
  2. SN74AVC4T245PWRG4: Quad-bit bi-directional voltage level translator with 3-state outputs. Package: TSSOP-20.
  3. SN74LVCH8T245PWRE4: Octal-bit bi-directional voltage level translator with 3-state outputs. Package: TSSOP-24.
  4. SN74CBT3257CPWRE4: Quad-bit bus switch with voltage level translation capability. Package: TSSOP-16.
  5. SN74AUP1T34DCKRG4: Single-bit unidirectional voltage level translator.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng SN74TVC3010DBQRG4 sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of SN74TVC3010DBQRG4 in technical solutions:

  1. Q: What is the SN74TVC3010DBQRG4? A: The SN74TVC3010DBQRG4 is a voltage level translator IC designed for bidirectional voltage translation between different logic levels.

  2. Q: What is the operating voltage range of SN74TVC3010DBQRG4? A: The operating voltage range of SN74TVC3010DBQRG4 is from 1.2V to 3.6V.

  3. Q: Can SN74TVC3010DBQRG4 be used for level shifting between different voltage domains? A: Yes, SN74TVC3010DBQRG4 is specifically designed for level shifting between different voltage domains.

  4. Q: What is the maximum data rate supported by SN74TVC3010DBQRG4? A: SN74TVC3010DBQRG4 supports a maximum data rate of 100 Mbps.

  5. Q: Does SN74TVC3010DBQRG4 support bidirectional voltage translation? A: Yes, SN74TVC3010DBQRG4 supports bidirectional voltage translation, allowing data transmission in both directions.

  6. Q: Can SN74TVC3010DBQRG4 be used with I2C or SPI interfaces? A: Yes, SN74TVC3010DBQRG4 can be used with I2C or SPI interfaces as it supports bidirectional communication.

  7. Q: What is the package type of SN74TVC3010DBQRG4? A: SN74TVC3010DBQRG4 comes in a small and compact 16-pin SSOP package.

  8. Q: Does SN74TVC3010DBQRG4 require any external components for operation? A: No, SN74TVC3010DBQRG4 does not require any external components for its basic operation.

  9. Q: Can SN74TVC3010DBQRG4 be used in automotive applications? A: Yes, SN74TVC3010DBQRG4 is qualified for automotive applications and can operate in harsh automotive environments.

  10. Q: Are there any application notes or reference designs available for SN74TVC3010DBQRG4? A: Yes, Texas Instruments provides application notes and reference designs to help users understand and implement SN74TVC3010DBQRG4 in their technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.