TL062ACDRG4

Product Overview

Category: Integrated Circuit (IC)

Use: The TL062ACDRG4 is a low-power JFET-input operational amplifier that is designed for general-purpose applications. It is commonly used in audio amplifiers, voltage followers, active filters, and instrumentation amplifiers.

Characteristics: - Low power consumption - High input impedance - Rail-to-rail output swing - Wide bandwidth - Low noise - Low offset voltage

Package: The TL062ACDRG4 is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence: This operational amplifier is known for its low power consumption and high input impedance, making it suitable for battery-powered devices and applications requiring high input sensitivity.

Packaging/Quantity: The TL062ACDRG4 is typically sold in reels or tubes containing multiple units. The exact quantity depends on the supplier and customer requirements.

Specifications

• Supply Voltage Range: ±2V to ±18V
• Input Offset Voltage: 3mV (maximum)
• Input Bias Current: 30pA (typical)
• Input Offset Current: 5pA (typical)
• Gain Bandwidth Product: 1MHz (typical)
• Slew Rate: 3.5V/µs (typical)
• Common Mode Rejection Ratio: 70dB (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TL062ACDRG4 has 8 pins arranged as follows:

```

---

| | --| IN- VCC |-- --| IN+ OUT |-- --| V- NC |-- --| V+ GND |-- |___________| ```

Pin Description: - IN-: Inverting input - IN+: Non-inverting input - V-: Negative power supply - V+: Positive power supply - OUT: Output - NC: No connection (unused pin) - GND: Ground

Functional Features

1. Low Power Consumption: The TL062ACDRG4 operates at low power levels, making it suitable for battery-powered devices and energy-efficient applications.

2. High Input Impedance: With a high input impedance of typically 10^12 ohms, this operational amplifier minimizes the loading effect on the signal source, ensuring accurate signal amplification.

3. Rail-to-Rail Output Swing: The output voltage can swing close to both the positive and negative supply rails, allowing for maximum utilization of the available voltage range.

4. Wide Bandwidth: The TL062ACDRG4 offers a wide bandwidth of up to 1MHz, enabling it to handle a broad range of frequencies accurately.

5. Low Noise: This operational amplifier has low noise characteristics, making it suitable for audio applications where signal fidelity is crucial.

6. Low Offset Voltage: The input offset voltage is minimized to ensure accurate amplification without introducing significant errors.

Advantages and Disadvantages

Advantages: - Low power consumption - High input impedance - Wide bandwidth - Rail-to-rail output swing - Low noise - Low offset voltage

Disadvantages: - Limited slew rate compared to some higher-end operational amplifiers - Lower gain bandwidth product compared to specialized amplifiers

Working Principles

The TL062ACDRG4 is a JFET-input operational amplifier that utilizes a differential amplifier configuration to amplify the input signal. It employs JFET (junction field-effect transistor) technology in its input stage, providing high input impedance and low input bias current. The amplified signal is then fed to the output stage, which drives the output voltage close to the supply rails.

Detailed Application Field Plans

The TL062ACDRG4 is widely used in various applications, including:

1. Audio Amplifiers: It can be employed in audio amplifiers for amplifying low-level audio signals with high fidelity.

2. Voltage Followers: The TL062ACDRG4 can be used as a voltage follower to buffer and isolate a signal source from the load, ensuring minimal distortion and signal degradation.

3. Active Filters: It is suitable for implementing active filters that require accurate amplification and filtering of specific frequency ranges.

4. Instrumentation Amplifiers: The TL062ACDRG4 can be utilized in instrumentation amplifiers to amplify small differential signals accurately, commonly used in measurement and sensing applications.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TL062ACDRG4 include:

1. TL072: This dual operational amplifier provides similar characteristics and pin configuration but offers two amplifiers in a single package.

2. LM358: A popular general-purpose operational amplifier with low power consumption and wide supply voltage range.

3. OP07