Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
TL974IDG4

TL974IDG4

Product Overview

TL974IDG4 belongs to the category of operational amplifiers (op-amps) and is commonly used in electronic circuits for signal processing and amplification. This op-amp is known for its high precision, low noise, and wide bandwidth characteristics. The TL974IDG4 comes in a small outline package (SOIC) with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: ±2 V to ±18 V
  • Input Offset Voltage: ±150 µV
  • Gain Bandwidth Product: 10 MHz
  • Slew Rate: 6 V/µs
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The TL974IDG4 has a standard 14-pin configuration with pin 1 as the offset null, pins 2 and 3 as the inverting input and non-inverting input, respectively, and pin 4 as the V- supply voltage. Pins 5 and 8 are connected to the output, while pins 7 and 14 are the V+ supply voltage. Pins 6, 9, 10, 11, 12, and 13 are the offset null, compensation, and other auxiliary pins.

Functional Features

The TL974IDG4 is designed to provide high precision amplification with low distortion and noise. It offers stable performance across a wide range of operating conditions and is suitable for applications requiring accurate signal processing.

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Low noise and distortion
  • Wide operating voltage range

Disadvantages

  • Relatively higher power consumption compared to some low-power op-amps
  • Sensitive to electromagnetic interference in certain applications

Working Principles

The TL974IDG4 operates based on the principles of differential amplification and feedback control. It amplifies the voltage difference between its inverting and non-inverting inputs while maintaining stability and linearity.

Detailed Application Field Plans

The TL974IDG4 is widely used in instrumentation amplifiers, audio processing equipment, data acquisition systems, and sensor signal conditioning circuits. Its high precision and low noise make it suitable for applications where accurate signal amplification is critical.

Detailed and Complete Alternative Models

Some alternative models to the TL974IDG4 include the LM324, LM358, and AD822. These op-amps offer similar functionality and can be used as substitutes depending on specific application requirements.

In conclusion, the TL974IDG4 is a versatile operational amplifier known for its high precision, low noise, and wide bandwidth characteristics. It finds extensive use in various electronic circuits and offers reliable performance across a wide range of applications.

Word Count: 330

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TL974IDG4 sa mga teknikal na solusyon

  1. What is TL974IDG4?

    • TL974IDG4 is a quad operational amplifier with rail-to-rail input and output capabilities, designed for use in a wide range of applications.
  2. What are the key features of TL974IDG4?

    • The key features include low noise, low offset voltage, low quiescent current, and wide supply voltage range, making it suitable for precision applications.
  3. What are the typical applications of TL974IDG4?

    • Typical applications include active filters, instrumentation amplifiers, precision integrators, and data acquisition systems.
  4. What is the supply voltage range for TL974IDG4?

    • TL974IDG4 can operate from a single or dual power supply with a wide voltage range, typically from 2.7V to 36V.
  5. What is the input common-mode voltage range of TL974IDG4?

    • The input common-mode voltage range extends beyond the supply rails, allowing for full utilization of the supply voltage range.
  6. Does TL974IDG4 have thermal shutdown protection?

    • Yes, TL974IDG4 is equipped with thermal shutdown protection to prevent damage from excessive heat.
  7. What is the typical noise level of TL974IDG4?

    • TL974IDG4 has low noise performance, typically around 10nV/√Hz at 1kHz.
  8. Can TL974IDG4 be used in automotive applications?

    • Yes, TL974IDG4 is suitable for automotive applications due to its wide supply voltage range and robust design.
  9. What is the recommended operating temperature range for TL974IDG4?

    • TL974IDG4 is designed to operate over a wide temperature range, typically from -40°C to 125°C.
  10. Is TL974IDG4 available in different package options?

    • Yes, TL974IDG4 is available in various package options, including SOIC and TSSOP, providing flexibility for different system designs.