Tingnan ang mga detalye para sa mga detalye ng produkto.
TLV2461AID
Product Overview
- Category: Operational Amplifier (Op-Amp)
- Use: TLV2461AID is a low-power, rail-to-rail input/output operational amplifier designed for general-purpose applications.
- Characteristics: It offers a wide supply voltage range, low input bias current, and low quiescent current, making it suitable for battery-powered devices. The device also provides high output current drive capability and excellent AC performance.
- Package: TLV2461AID comes in an 8-pin SOIC package.
- Essence: TLV2461AID is a versatile operational amplifier that combines low power consumption with high performance, making it ideal for various applications.
- Packaging/Quantity: TLV2461AID is typically available in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: 1pA (typical)
- Quiescent Current: 900µA (typical)
- Gain Bandwidth Product: 1MHz (typical)
- Slew Rate: 0.5V/µs (typical)
- Output Current: 40mA (typical)
Pin Configuration
The TLV2461AID features the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | NC
‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- Low power consumption
- Rail-to-rail input and output operation
- Wide supply voltage range
- High output current drive capability
- Excellent AC performance
Advantages and Disadvantages
Advantages: - Low input bias current - Suitable for battery-powered devices - Versatile and suitable for general-purpose applications - High output current drive capability
Disadvantages: - Limited gain bandwidth product compared to some specialized op-amps - Relatively low slew rate
Working Principles
The TLV2461AID operates as a voltage amplifier, amplifying the difference between its two input terminals. It utilizes a differential input stage followed by a gain stage and an output buffer. The rail-to-rail input/output capability allows it to handle signals close to the supply rails.
Detailed Application Field Plans
The TLV2461AID can be used in various applications, including but not limited to: - Portable audio devices - Sensor signal conditioning - Battery-powered instrumentation - Active filters - Signal amplification in low-power systems
Alternative Models
Some alternative models that offer similar functionality to TLV2461AID include: - LM358 - MCP6001 - AD8605 - MAX44246
These alternatives should be evaluated based on specific application requirements and desired performance characteristics.
Word count: 275 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng TLV2461AID sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of TLV2461AID in technical solutions:
Q1: What is TLV2461AID? A1: TLV2461AID is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.
Q2: What is the supply voltage range for TLV2461AID? A2: The supply voltage range for TLV2461AID is typically between 2.7V and 6V.
Q3: What is the input offset voltage of TLV2461AID? A3: The input offset voltage of TLV2461AID is typically around 1mV.
Q4: What is the input bias current of TLV2461AID? A4: The input bias current of TLV2461AID is typically around 1pA.
Q5: Can TLV2461AID operate with a single power supply? A5: Yes, TLV2461AID can operate with a single power supply as it has rail-to-rail input/output capability.
Q6: What is the bandwidth of TLV2461AID? A6: The bandwidth of TLV2461AID is typically around 3MHz.
Q7: Is TLV2461AID suitable for low-power applications? A7: Yes, TLV2461AID is designed for low-power applications, consuming very little power.
Q8: Can TLV2461AID be used in precision measurement circuits? A8: Yes, TLV2461AID can be used in precision measurement circuits due to its low input offset voltage and low input bias current.
Q9: Does TLV2461AID have built-in protection features? A9: Yes, TLV2461AID has built-in features like short-circuit protection and thermal shutdown to protect the device from damage.
Q10: What are some typical applications of TLV2461AID? A10: TLV2461AID is commonly used in battery-powered devices, portable instrumentation, sensor interfaces, and audio amplification circuits.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.