The TPS3852H33DRBR belongs to the category of voltage supervisors.
It is primarily used for monitoring and supervising the voltage levels in electronic systems.
The TPS3852H33DRBR comes in a small and compact package, which is easy to integrate into electronic circuits.
The essence of the TPS3852H33DRBR lies in its ability to monitor voltage levels and provide a reliable reset signal when necessary.
This product is typically available in tape and reel packaging, with a quantity of 2500 units per reel.
The TPS3852H33DRBR has the following pin configuration:
The TPS3852H33DRBR operates by comparing the monitored voltage with the fixed threshold voltage. When the voltage falls below the threshold, it asserts the reset signal, indicating a power failure or brownout condition. This ensures that the system remains in a known state and prevents any erratic behavior.
The TPS3852H33DRBR finds application in various fields, including:
These alternative models provide similar voltage monitoring capabilities with slight variations in specifications and features.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of TPS3852H33DRBR in technical solutions:
Q: What is the TPS3852H33DRBR? A: The TPS3852H33DRBR is a voltage supervisor and reset IC designed for monitoring power supply voltages in various applications.
Q: What is the operating voltage range of TPS3852H33DRBR? A: The TPS3852H33DRBR operates within a voltage range of 1.8V to 5.5V.
Q: What is the purpose of using TPS3852H33DRBR in a technical solution? A: TPS3852H33DRBR ensures reliable system operation by monitoring power supply voltages and generating a reset signal when the voltage falls below a specified threshold.
Q: Can TPS3852H33DRBR be used in battery-powered applications? A: Yes, TPS3852H33DRBR can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.6µA.
Q: How many voltage thresholds can TPS3852H33DRBR monitor? A: TPS3852H33DRBR can monitor one voltage threshold, which is programmable through external resistors.
Q: Does TPS3852H33DRBR have a manual reset input? A: No, TPS3852H33DRBR does not have a manual reset input. The reset output is generated automatically based on the monitored voltage.
Q: What is the typical reset time delay of TPS3852H33DRBR? A: The typical reset time delay of TPS3852H33DRBR is 200ms.
Q: Can TPS3852H33DRBR tolerate voltage transients or spikes? A: Yes, TPS3852H33DRBR has built-in hysteresis and can tolerate voltage transients or spikes without generating a false reset signal.
Q: Is TPS3852H33DRBR available in different package options? A: Yes, TPS3852H33DRBR is available in a small 6-pin SOT-23 package.
Q: What are some typical applications of TPS3852H33DRBR? A: TPS3852H33DRBR is commonly used in industrial automation, consumer electronics, medical devices, and other systems where reliable power supply monitoring is critical.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of the TPS3852H33DRBR.