XC6108C30DGR-G belongs to the category of voltage regulators.
It is commonly used as a voltage regulator in electronic circuits.
XC6108C30DGR-G is available in a small surface mount package.
The essence of XC6108C30DGR-G is to provide stable and regulated voltage output for electronic devices.
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
XC6108C30DGR-G has the following pin configuration:
XC6108C30DGR-G utilizes internal circuitry to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a constant output voltage.
XC6108C30DGR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems
Some alternative models that can be considered as alternatives to XC6108C30DGR-G are: - LM1117-3.0 - MCP1703-3002E/DB - AP2112K-3.0TRG1 - TS2937CP-3.0
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 314 words
Sure! Here are 10 common questions and answers related to the application of XC6108C30DGR-G in technical solutions:
Question: What is XC6108C30DGR-G?
Answer: XC6108C30DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Question: What is the operating voltage range of XC6108C30DGR-G?
Answer: The operating voltage range of XC6108C30DGR-G is typically between 0.9V and 6.0V.
Question: How does XC6108C30DGR-G help in technical solutions?
Answer: XC6108C30DGR-G ensures stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent malfunctioning or data corruption during power fluctuations.
Question: Can XC6108C30DGR-G be used in battery-powered applications?
Answer: Yes, XC6108C30DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 0.5µA.
Question: What is the output type of XC6108C30DGR-G?
Answer: XC6108C30DGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Question: What is the typical reset threshold voltage of XC6108C30DGR-G?
Answer: The typical reset threshold voltage of XC6108C30DGR-G is 3.0V.
Question: Can XC6108C30DGR-G be used in automotive applications?
Answer: Yes, XC6108C30DGR-G is suitable for automotive applications as it can operate in a wide temperature range of -40°C to +105°C.
Question: Does XC6108C30DGR-G have any built-in delay time?
Answer: Yes, XC6108C30DGR-G has a built-in delay time of typically 200ms to ensure stable reset signals during power-on or power-off transitions.
Question: Can XC6108C30DGR-G be used in industrial control systems?
Answer: Yes, XC6108C30DGR-G is commonly used in industrial control systems to monitor the power supply voltage and provide reliable reset signals to microcontrollers or other critical components.
Question: Is XC6108C30DGR-G available in different package options?
Answer: Yes, XC6108C30DGR-G is available in various package options such as SOT-25, SOT-89, and USP-6B, providing flexibility for different application requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C30DGR-G.