Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.

Tingnan ang Detalye DataSheets

XC6108C34BGR-G

Overview

Product Category

XC6108C34BGR-G belongs to the category of electronic components.

Use

XC6108C34BGR-G is used as a voltage regulator in electronic circuits.

Characteristics

Voltage regulation
Small form factor
Low power consumption
High efficiency

Package

XC6108C34BGR-G comes in a small surface mount package.

Essence

The essence of XC6108C34BGR-G is to provide stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6108C34BGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

Input Voltage Range: 2.5V - 6.0V
Output Voltage: 3.4V
Output Current: 100mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 30μA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C34BGR-G has the following pin configuration:

VIN (Input Voltage)
GND (Ground)
VOUT (Output Voltage)

Functional Features

Voltage regulation: XC6108C34BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
Overcurrent protection: It provides protection against excessive current flow.
Thermal shutdown: In case of overheating, the device shuts down to prevent damage.
Low quiescent current: The device consumes minimal power when not actively regulating the voltage.

Advantages and Disadvantages

Advantages

Compact size allows for easy integration into various electronic devices.
Low power consumption helps prolong battery life.
Wide operating temperature range makes it suitable for various environments.
Overcurrent protection ensures the safety of connected devices.

Disadvantages

Limited output current may not be suitable for high-power applications.
Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6108C34BGR-G works by comparing the output voltage with a reference voltage. If the output voltage drops below the desired level, the device adjusts the internal circuitry to increase the output voltage. Conversely, if the output voltage exceeds the desired level, the device reduces the output voltage.

Detailed Application Field Plans

XC6108C34BGR-G is commonly used in the following applications:

Battery-powered devices: It provides stable voltage regulation for portable electronic devices such as smartphones, tablets, and wearables.
IoT devices: XC6108C34BGR-G ensures consistent power supply for sensors, microcontrollers, and communication modules in IoT applications.
Automotive electronics: It is used in automotive systems to regulate voltage for various components, including infotainment systems, lighting, and control units.

Detailed and Complete Alternative Models

Some alternative models to XC6108C34BGR-G include:

XC6206P332MR-G: Similar voltage regulator with a different output voltage (3.3V).
XC6220B331MR-G: Voltage regulator with a higher output current capability (300mA).
XC6219B332MR-G: Voltage regulator with a lower dropout voltage (100mV).

These alternative models offer similar functionality but may have slightly different specifications to suit specific application requirements.

Word count: 511 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6108C34BGR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6108C34BGR-G in technical solutions:

Q: What is XC6108C34BGR-G? A: XC6108C34BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.
Q: What is the operating voltage range of XC6108C34BGR-G? A: The operating voltage range of XC6108C34BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C34BGR-G work? A: XC6108C34BGR-G works by comparing the input voltage with a fixed reference voltage. It outputs a signal when the input voltage falls below a certain threshold.
Q: What is the output type of XC6108C34BGR-G? A: XC6108C34BGR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.
Q: What is the typical quiescent current of XC6108C34BGR-G? A: The typical quiescent current of XC6108C34BGR-G is around 1.0µA, making it suitable for low-power applications.
Q: Can XC6108C34BGR-G be used for overvoltage protection? A: No, XC6108C34BGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q: What is the accuracy of the voltage detection threshold in XC6108C34BGR-G? A: The accuracy of the voltage detection threshold in XC6108C34BGR-G is typically ±1.5%.
Q: Can XC6108C34BGR-G be used in automotive applications? A: Yes, XC6108C34BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.
Q: Does XC6108C34BGR-G have built-in hysteresis? A: Yes, XC6108C34BGR-G has built-in hysteresis to prevent oscillation or chattering of the output signal near the detection threshold.
Q: What package does XC6108C34BGR-G come in? A: XC6108C34BGR-G is available in a small SOT-23-5 package, which is commonly used in compact electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C34BGR-G.