Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6108C39DGR-G
Product Overview
Category
XC6108C39DGR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6108C39DGR-G comes in a small surface mount package.
Essence
The essence of XC6108C39DGR-G is to provide stable and regulated voltage to ensure proper functioning of electronic devices.
Packaging/Quantity
XC6108C39DGR-G is typically packaged in reels and the quantity per reel varies depending on the manufacturer.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.9V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C39DGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6108C39DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It can operate with a very small voltage difference between input and output.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It shuts down automatically if the temperature exceeds a certain threshold, preventing damage.
- Short circuit protection: It safeguards against excessive current flow during a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance of electronic devices.
- Low dropout voltage allows efficient power utilization.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating and damage.
- Short circuit protection enhances safety.
Disadvantages
- Limited input voltage range (2.5V - 6.0V).
- Dropout voltage may cause inefficiency in certain applications.
Working Principles
XC6108C39DGR-G works by comparing the output voltage with a reference voltage. It adjusts the resistance to maintain a constant output voltage, compensating for any fluctuations in the input voltage.
Detailed Application Field Plans
XC6108C39DGR-G is commonly used in various electronic devices, including: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C39DGR-G are: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
Word count: 346 words
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6108C39DGR-G sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of XC6108C39DGR-G in technical solutions:
1. What is XC6108C39DGR-G? - XC6108C39DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
2. What is the operating voltage range of XC6108C39DGR-G? - The operating voltage range of XC6108C39DGR-G is typically between 0.9V and 6.0V.
3. What is the typical reset threshold voltage of XC6108C39DGR-G? - The typical reset threshold voltage of XC6108C39DGR-G is 3.9V.
4. How does XC6108C39DGR-G help in technical solutions? - XC6108C39DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage drops below a certain level. This ensures proper initialization and prevents data corruption or malfunctioning.
5. Can XC6108C39DGR-G be used in battery-powered applications? - Yes, XC6108C39DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
6. Is XC6108C39DGR-G compatible with different microcontroller families? - Yes, XC6108C39DGR-G is compatible with various microcontroller families as it provides an active-low reset output signal that can be easily interfaced with different microcontroller reset pins.
7. Does XC6108C39DGR-G have any built-in delay for the reset signal? - Yes, XC6108C39DGR-G has a built-in delay of typically 200ms for the reset signal to ensure stable power supply before releasing the reset condition.
8. Can XC6108C39DGR-G be used in automotive applications? - Yes, XC6108C39DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards, ensuring high reliability and performance in harsh environments.
9. What is the package type of XC6108C39DGR-G? - XC6108C39DGR-G is available in a small SOT-25 package, which is compact and easy to integrate into space-constrained designs.
10. Are there any application notes or reference designs available for XC6108C39DGR-G? - Yes, the manufacturer provides application notes and reference designs for XC6108C39DGR-G, which can help designers understand its usage and optimize its performance in specific applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6108C39DGR-G.