Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6108C40DGR-G

XC6108C40DGR-G

Product Overview

Category

XC6108C40DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6108C40DGR-G comes in a small surface-mount package.

Essence

The essence of XC6108C40DGR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6108C40DGR-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.0V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108C40DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108C40DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: The regulator automatically shuts down when it reaches a certain temperature, preventing damage due to overheating.
  • Low quiescent current: The low quiescent current ensures minimal power consumption during standby or idle states.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Wide input voltage range provides flexibility in various applications.
  • Low dropout voltage minimizes power loss.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

XC6108C40DGR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6108C40DGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C40DGR-G are: - LM1117-4.0 - MCP1700-4002E/TO - TS2937CP-4.0

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.

Word count: 372 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6108C40DGR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6108C40DGR-G in technical solutions:

  1. Q: What is XC6108C40DGR-G? A: XC6108C40DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C40DGR-G? A: The operating voltage range of XC6108C40DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C40DGR-G help in technical solutions? A: XC6108C40DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.

  4. Q: Can XC6108C40DGR-G be used in battery-powered applications? A: Yes, XC6108C40DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6108C40DGR-G? A: The typical reset threshold voltage of XC6108C40DGR-G is 4.0V.

  6. Q: Does XC6108C40DGR-G have an adjustable reset threshold voltage? A: No, XC6108C40DGR-G does not have an adjustable reset threshold voltage. It has a fixed threshold voltage of 4.0V.

  7. Q: Is XC6108C40DGR-G suitable for automotive applications? A: Yes, XC6108C40DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Q: Can XC6108C40DGR-G be used in industrial control systems? A: Yes, XC6108C40DGR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.

  9. Q: Does XC6108C40DGR-G have any built-in delay time for the reset signal? A: Yes, XC6108C40DGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  10. Q: What package does XC6108C40DGR-G come in? A: XC6108C40DGR-G comes in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C40DGR-G.