Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6118C11DGR-G
Tingnan ang Detalye DataSheets

XC6118C11DGR-G

Product Overview

Category

XC6118C11DGR-G belongs to the category of voltage regulators.

Use

It is commonly used as a power management solution in various electronic devices.

Characteristics

  • Voltage regulation capability
  • Low dropout voltage
  • High output current
  • Thermal shutdown protection
  • Overcurrent protection

Package

XC6118C11DGR-G is available in a small form factor package, typically SOT-23.

Essence

The essence of XC6118C11DGR-G lies in its ability to regulate and stabilize voltage levels within electronic circuits.

Packaging/Quantity

Typically, XC6118C11DGR-G is packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.1V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C11DGR-G has three pins:

  1. VIN (Input Voltage): Connects to the input voltage source.
  2. VOUT (Output Voltage): Provides the regulated output voltage.
  3. GND (Ground): Common ground reference for the circuit.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage regardless of input voltage fluctuations.
  • Low Dropout Voltage: Allows efficient operation even when the input voltage is close to the desired output voltage.
  • Thermal Shutdown Protection: Prevents damage due to excessive heat by shutting down the regulator temporarily.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current during abnormal conditions.

Advantages and Disadvantages

Advantages

  • Compact size and easy integration into various electronic devices.
  • High output current capability for powering multiple components.
  • Efficient voltage regulation with low dropout voltage.
  • Built-in protection features enhance circuit reliability.

Disadvantages

  • Limited output current compared to higher-rated regulators.
  • May require additional external components for specific applications.

Working Principles

XC6118C11DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6118C11DGR-G finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C11DGR-G include: - LM1117-1.1 - MCP1700-1102E/TO - TPS78233DDCR - LT1761ES5-1.1

These alternatives offer similar voltage regulation capabilities and may vary in terms of package type, specifications, and additional features.

Note: The content provided above is an example and does not reflect actual specifications or details of XC6118C11DGR-G or its alternatives.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6118C11DGR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6118C11DGR-G in technical solutions:

  1. Q: What is XC6118C11DGR-G? A: XC6118C11DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C11DGR-G? A: The operating voltage range of XC6118C11DGR-G is typically from 0.9V to 6.0V.

  3. Q: How does XC6118C11DGR-G help in technical solutions? A: XC6118C11DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.

  4. Q: What is the typical reset voltage threshold of XC6118C11DGR-G? A: The typical reset voltage threshold of XC6118C11DGR-G is 1.1V.

  5. Q: Can XC6118C11DGR-G be used with both positive and negative voltage supplies? A: No, XC6118C11DGR-G is designed for use with positive voltage supplies only.

  6. Q: What is the output type of XC6118C11DGR-G? A: XC6118C11DGR-G has an open-drain output type, which requires an external pull-up resistor.

  7. Q: What is the maximum current that XC6118C11DGR-G can sink? A: The maximum sinking current of XC6118C11DGR-G is typically 5mA.

  8. Q: Can XC6118C11DGR-G be used in battery-powered applications? A: Yes, XC6118C11DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  9. Q: Does XC6118C11DGR-G have any built-in delay for the reset signal? A: No, XC6118C11DGR-G does not have any built-in delay. The reset signal is generated immediately when the voltage drops below the threshold.

  10. Q: Is XC6118C11DGR-G available in different package options? A: Yes, XC6118C11DGR-G is available in various package options, such as SOT-25 and USP-4B, to suit different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C11DGR-G.