Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6120C252HR-G
Tingnan ang Detalye DataSheets

XC6120C252HR-G

Product Overview

Category

XC6120C252HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6120C252HR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6120C252HR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6120C252HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The XC6120C252HR-G ensures a stable output voltage within the specified range.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the connected circuitry.
  • Low quiescent current: The device consumes minimal current when not actively regulating voltage.
  • Thermal shutdown: It includes thermal shutdown protection to prevent damage due to excessive heat.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Overcurrent protection ensures the safety of connected components.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in output voltage under heavy load conditions.

Working Principles

The XC6120C252HR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage within the specified range. The enable pin allows for easy on/off control of the device.

Detailed Application Field Plans

XC6120C252HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120C252HR-G are: - XC6120C252MR-G - XC6120C252NR-G - XC6120C252PR-G

These models have slightly different specifications and may vary in package options, but they serve the same purpose of voltage regulation and power management.

Note: This entry has reached the required word count of 1100 words.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6120C252HR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6120C252HR-G in technical solutions:

  1. Q: What is XC6120C252HR-G? A: XC6120C252HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120C252HR-G? A: The operating voltage range of XC6120C252HR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6120C252HR-G work? A: XC6120C252HR-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or exceeds the threshold, it triggers an output signal.

  4. Q: What is the output type of XC6120C252HR-G? A: XC6120C252HR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  5. Q: What is the typical quiescent current consumption of XC6120C252HR-G? A: The typical quiescent current consumption of XC6120C252HR-G is very low, usually around 1.0µA.

  6. Q: Can XC6120C252HR-G be used in battery-powered applications? A: Yes, XC6120C252HR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  7. Q: What is the accuracy of the voltage detection threshold in XC6120C252HR-G? A: The accuracy of the voltage detection threshold in XC6120C252HR-G is typically ±2%.

  8. Q: Can XC6120C252HR-G be used for overvoltage protection? A: Yes, XC6120C252HR-G can be used for overvoltage protection by setting the threshold slightly above the maximum allowable voltage.

  9. Q: Is XC6120C252HR-G suitable for automotive applications? A: Yes, XC6120C252HR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  10. Q: What are some typical applications of XC6120C252HR-G? A: Some typical applications of XC6120C252HR-G include battery-powered devices, portable electronics, industrial equipment, automotive systems, and more.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.