Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6120C262HR-G

XC6120C262HR-G

Product Overview

Category

XC6120C262HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6120C262HR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6120C262HR-G lies in its ability to regulate voltage and efficiently manage power in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6120C262HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

  • Voltage regulation: The XC6120C262HR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: This IC incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive heat, the XC6120C262HR-G automatically shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption when the device is in standby mode.

Advantages and Disadvantages

Advantages

  • High efficiency: The XC6120C262HR-G offers high efficiency, resulting in reduced power wastage.
  • Compact size: Its small form factor makes it suitable for space-constrained applications.
  • Wide input voltage range: It can operate within a wide input voltage range, providing flexibility in various applications.

Disadvantages

  • Limited output current: The maximum output current of 200mA may not be sufficient for high-power applications.
  • Dropout voltage: The dropout voltage of 150mV at 100mA might affect performance in low voltage scenarios.

Working Principles

The XC6120C262HR-G utilizes a feedback control mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6120C262HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120C262HR-G are: - XC6206P302MR-G - XC6220B332MR-G - XC6219B182MR-G - XC6220C502MR-G - XC6206P252MR-G

These models provide comparable voltage regulation and power management capabilities, catering to different requirements and specifications.

Word count: 347 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6120C262HR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6120C262HR-G in technical solutions:

  1. Q: What is XC6120C262HR-G? A: XC6120C262HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120C262HR-G? A: The operating voltage range of XC6120C262HR-G is from 0.8V to 6.0V.

  3. Q: What is the output type of XC6120C262HR-G? A: XC6120C262HR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: What is the typical quiescent current consumption of XC6120C262HR-G? A: The typical quiescent current consumption of XC6120C262HR-G is very low, typically around 1.0µA.

  5. Q: Can XC6120C262HR-G be used for overvoltage detection? A: No, XC6120C262HR-G is specifically designed for undervoltage detection only. It triggers an output when the monitored voltage falls below a certain threshold.

  6. Q: What is the accuracy of the undervoltage detection threshold in XC6120C262HR-G? A: The accuracy of the undervoltage detection threshold in XC6120C262HR-G is typically ±2%.

  7. Q: Does XC6120C262HR-G have built-in hysteresis? A: Yes, XC6120C262HR-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.

  8. Q: Can XC6120C262HR-G be used in battery-powered applications? A: Yes, XC6120C262HR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Q: What is the package type of XC6120C262HR-G? A: XC6120C262HR-G is available in a small SOT-23-5 package, which is compact and widely used in various electronic devices.

  10. Q: Is XC6120C262HR-G RoHS compliant? A: Yes, XC6120C262HR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.