Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6120C372HR-G
Tingnan ang Detalye DataSheets

XC6120C372HR-G

Product Overview

Category

XC6120C372HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6120C372HR-G is available in a small form factor package, suitable for surface mount technology (SMT) applications.

Essence

The essence of XC6120C372HR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 100mV (typical)

Detailed Pin Configuration

XC6120C372HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Fast transient response

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Low quiescent current

Disadvantages

  • Limited maximum output current (200mA)

Working Principles

XC6120C372HR-G operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the output voltage based on the input voltage and load conditions.

Detailed Application Field Plans

XC6120C372HR-G is commonly used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6120C372HR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These alternative models offer similar voltage regulation and power management capabilities, with slight variations in specifications and package options.

In conclusion, XC6120C372HR-G is a compact integrated circuit designed for voltage regulation and power management in electronic devices. With its high efficiency and wide input voltage range, it offers reliable performance in various applications. However, its limited maximum output current may restrict its use in certain high-power applications.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6120C372HR-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6120C372HR-G in technical solutions:

  1. Q: What is XC6120C372HR-G? A: XC6120C372HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120C372HR-G? A: The operating voltage range of XC6120C372HR-G is from 0.6V to 10.0V.

  3. Q: What is the output type of XC6120C372HR-G? A: XC6120C372HR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: What is the typical quiescent current consumption of XC6120C372HR-G? A: The typical quiescent current consumption of XC6120C372HR-G is very low, typically around 1.0µA.

  5. Q: Can XC6120C372HR-G be used for overvoltage detection? A: No, XC6120C372HR-G is specifically designed for undervoltage detection. It triggers an output when the monitored voltage falls below a certain threshold.

  6. Q: What is the accuracy of the undervoltage detection threshold in XC6120C372HR-G? A: The accuracy of the undervoltage detection threshold in XC6120C372HR-G is typically ±2%.

  7. Q: Does XC6120C372HR-G have built-in hysteresis? A: Yes, XC6120C372HR-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.

  8. Q: Can XC6120C372HR-G be used in automotive applications? A: Yes, XC6120C372HR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the temperature range of operation for XC6120C372HR-G? A: XC6120C372HR-G can operate within a temperature range of -40°C to +85°C.

  10. Q: What package does XC6120C372HR-G come in? A: XC6120C372HR-G is available in a small SOT-23-5 package, which is commonly used for surface-mount applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.