Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6121C240ER-G
Tingnan ang Detalye DataSheets

XC6121C240ER-G

Product Overview

Category

XC6121C240ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Package

XC6121C240ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6121C240ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6121C240ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.4V
  • Output Current: Up to 150mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121C240ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • High Precision Regulation: XC6121C240ER-G provides precise voltage regulation, ensuring stable performance of connected devices.
  • Low Dropout Voltage: The low dropout voltage minimizes power loss and improves overall efficiency.
  • Low Quiescent Current: With low quiescent current, the regulator consumes minimal power during standby or idle mode.
  • Thermal Shutdown Protection: It incorporates thermal shutdown protection to prevent overheating and potential damage.
  • Short-Circuit Protection: XC6121C240ER-G is equipped with short-circuit protection, safeguarding the circuit from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance.
  • Low dropout voltage minimizes power loss.
  • Low quiescent current reduces power consumption during standby.
  • Thermal shutdown protection prevents overheating.
  • Short-circuit protection safeguards the circuit.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

XC6121C240ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance within the regulator to maintain a constant output voltage, compensating for any fluctuations in the input voltage or load conditions.

Detailed Application Field Plans

XC6121C240ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121C240ER-G are: - XC6121C240ER-G-7 - XC6121C240ER-G-8 - XC6121C240ER-G-9 - XC6121C240ER-G-10

These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable voltage regulator for specific requirements.

Word count: 413 words

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6121C240ER-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6121C240ER-G in technical solutions:

Q1: What is XC6121C240ER-G? A1: XC6121C240ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

Q2: What is the operating voltage range of XC6121C240ER-G? A2: The operating voltage range of XC6121C240ER-G is from 0.8V to 6.0V.

Q3: What is the typical voltage detection accuracy of XC6121C240ER-G? A3: The typical voltage detection accuracy of XC6121C240ER-G is ±1.5%.

Q4: How much current does XC6121C240ER-G consume during operation? A4: XC6121C240ER-G has a low quiescent current consumption of typically 1.0µA.

Q5: Can XC6121C240ER-G be used for overvoltage protection? A5: No, XC6121C240ER-G is specifically designed for undervoltage detection. It does not provide overvoltage protection.

Q6: What is the output configuration of XC6121C240ER-G? A6: XC6121C240ER-G has an open-drain output configuration, which requires an external pull-up resistor.

Q7: What is the maximum output sink current of XC6121C240ER-G? A7: The maximum output sink current of XC6121C240ER-G is 50mA.

Q8: Can XC6121C240ER-G be used in automotive applications? A8: Yes, XC6121C240ER-G is AEC-Q100 qualified and suitable for automotive applications.

Q9: Does XC6121C240ER-G have built-in hysteresis? A9: Yes, XC6121C240ER-G has a built-in hysteresis of typically 50mV to prevent output oscillation near the detection threshold.

Q10: What is the package type of XC6121C240ER-G? A10: XC6121C240ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult the manufacturer for specific details and application requirements.