Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6121D528MR-G
Product Overview
Category
XC6121D528MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize the voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 2.8V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Package
XC6121D528MR-G comes in a small SOT-25 package.
Essence
The essence of XC6121D528MR-G is its ability to provide a stable output voltage despite variations in the input voltage.
Packaging/Quantity
It is typically packaged in reels, with 3,000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 2.8V
- Output Current: Up to 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Line Regulation: ±0.2% (typical)
- Load Regulation: ±0.4% (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6121D528MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Overcurrent protection
- Thermal shutdown protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Stable output voltage
- Low power consumption
- Small package size
- Overcurrent and thermal protection
Disadvantages
- Limited maximum output current (150mA)
Working Principles
XC6121D528MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.
Detailed Application Field Plans
XC6121D528MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial equipment
Detailed and Complete Alternative Models
Some alternative models to XC6121D528MR-G are: - XC6121C528MR-G: Same specifications, different package (SOT-89) - XC6121D528MR: Same specifications, no reel packaging - XC6121D328MR-G: Lower output voltage (2.3V), same package (SOT-25) - XC6121D628MR-G: Higher output voltage (2.8V), same package (SOT-25)
Note: The above alternative models are for illustrative purposes only and may vary based on availability and specific requirements.
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6121D528MR-G sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of XC6121D528MR-G in technical solutions:
Q1: What is XC6121D528MR-G? A1: XC6121D528MR-G is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to provide stable voltage regulation in various electronic applications.
Q2: What is the input voltage range for XC6121D528MR-G? A2: The input voltage range for XC6121D528MR-G is typically between 2.5V and 6.0V.
Q3: What is the output voltage of XC6121D528MR-G? A3: The output voltage of XC6121D528MR-G is fixed at 5.2V.
Q4: What is the maximum output current of XC6121D528MR-G? A4: The maximum output current of XC6121D528MR-G is typically around 150mA.
Q5: Can XC6121D528MR-G be used in battery-powered applications? A5: Yes, XC6121D528MR-G can be used in battery-powered applications as it has a low quiescent current and operates efficiently even with limited power supply.
Q6: Is XC6121D528MR-G suitable for automotive applications? A6: Yes, XC6121D528MR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 1 qualification.
Q7: Does XC6121D528MR-G have built-in protection features? A7: Yes, XC6121D528MR-G incorporates various protection features like overcurrent protection, thermal shutdown, and short-circuit protection.
Q8: Can XC6121D528MR-G be used in space-constrained designs? A8: Yes, XC6121D528MR-G is available in a small SOT-25 package, making it suitable for space-constrained designs.
Q9: What is the operating temperature range of XC6121D528MR-G? A9: The operating temperature range of XC6121D528MR-G is typically between -40°C and +85°C.
Q10: Are there any application notes or reference designs available for XC6121D528MR-G? A10: Yes, Torex Semiconductor provides application notes and reference designs that can help users understand and implement XC6121D528MR-G in their technical solutions.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.