Torex Semiconductor Ltd
Maaaring representasyon ang larawan.
Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6122A319ER-G
Tingnan ang Detalye DataSheets

XC6122A319ER-G

Product Overview

Category

XC6122A319ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122A319ER-G comes in a small surface-mount package.

Essence

The essence of XC6122A319ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A319ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Reverse current protection

Advantages

  • Small form factor allows for space-saving designs
  • Wide input voltage range enables compatibility with various power sources
  • Low quiescent current minimizes power consumption
  • Excellent voltage regulation ensures stable performance
  • Built-in protection features enhance reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to some alternative models

Working Principles

XC6122A319ER-G operates by comparing the output voltage with a reference voltage. It adjusts the internal resistance to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122A319ER-G finds applications in various electronic devices, including:

  1. Portable consumer electronics
  2. Battery-powered devices
  3. IoT devices
  4. Wearable devices
  5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A319ER-G are:

  1. XC6206P332MR-G
  2. LM1117IMPX-3.3/NOPB
  3. MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and may have different package options or additional features.

In conclusion, XC6122A319ER-G is a compact voltage regulator with excellent voltage regulation and protection features. It is widely used in various electronic devices and offers advantages such as small size, wide input voltage range, and low power consumption. However, its limited output current and higher cost compared to some alternatives should be taken into consideration when selecting a voltage regulator for specific applications.

Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6122A319ER-G sa mga teknikal na solusyon

Sure! Here are 10 common questions and answers related to the application of XC6122A319ER-G in technical solutions:

  1. Question: What is XC6122A319ER-G?
    - Answer: XC6122A319ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122A319ER-G?
    - Answer: The operating voltage range of XC6122A319ER-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6122A319ER-G help in technical solutions?
    - Answer: XC6122A319ER-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6122A319ER-G?
    - Answer: XC6122A319ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6122A319ER-G?
    - Answer: The typical reset threshold voltage of XC6122A319ER-G is 3.1V.

  6. Question: Can XC6122A319ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122A319ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 0.7µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6122A319ER-G have a built-in delay circuit?
    - Answer: Yes, XC6122A319ER-G has a built-in delay circuit that ensures the reset signal remains active for a specified period after the power supply voltage rises above the threshold level. The delay time is typically 200ms.

  8. Question: Is XC6122A319ER-G available in different package options?
    - Answer: Yes, XC6122A319ER-G is available in various package options, including SOT-23-3 and USP-4B05.

  9. Question: Can XC6122A319ER-G be used in automotive applications?
    - Answer: Yes, XC6122A319ER-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable voltage monitoring and reset functionality are required.

  10. Question: Are there any application notes or reference designs available for XC6122A319ER-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6122A319ER-G, which can help designers understand its usage and integration in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.