Tingnan ang mga detalye para sa mga detalye ng produkto.
XC6122A417MR-G
Product Overview
Category
XC6122A417MR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
Characteristics
- Voltage regulation: XC6122A417MR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
- Short-circuit protection: It safeguards against short-circuits, preventing damage to the circuitry.
Package
XC6122A417MR-G is available in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of XC6122A417MR-G lies in its ability to provide reliable and stable voltage regulation in various electronic devices.
Packaging/Quantity
The product is typically packaged in reels or tape and reel packaging. The exact quantity may vary depending on the supplier.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 4.17V
- Maximum output current: 150mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 30µA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6122A417MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6122A417MR-G maintains a constant output voltage regardless of changes in input voltage or load conditions.
- Low dropout voltage: It can operate with a minimal voltage difference between the input and output, ensuring efficient power conversion.
- Low quiescent current: The regulator consumes very little current when no load is connected, minimizing power wastage.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a certain threshold, protecting the device from overheating.
- Short-circuit protection: XC6122A417MR-G has built-in protection against short-circuits, preventing damage to the circuitry.
Advantages and Disadvantages
Advantages
- Stable output voltage regulation
- Low dropout voltage for efficient operation
- Low quiescent current for power-saving
- Thermal shutdown protection for device safety
- Short-circuit protection for circuit protection
Disadvantages
- Limited maximum output current (150mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6122A417MR-G utilizes internal circuitry to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the internal feedback loop accordingly to maintain a stable output. The regulator continuously monitors the input voltage, load conditions, and temperature to ensure proper voltage regulation and protect the circuitry from potential damage.
Detailed Application Field Plans
XC6122A417MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6122A417MR-G are: - XC6206P417MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
These alternatives provide comparable voltage regulation and features, allowing users to choose based on specific requirements and availability.
Word count: 410
Maglista ng 10 karaniwang tanong at sagot na nauugnay sa aplikasyon ng XC6122A417MR-G sa mga teknikal na solusyon
Sure! Here are 10 common questions and answers related to the application of XC6122A417MR-G in technical solutions:
Q: What is XC6122A417MR-G? A: XC6122A417MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6122A417MR-G? A: The operating voltage range of XC6122A417MR-G is typically between 0.8V and 6.0V.
Q: How does XC6122A417MR-G help in technical solutions? A: XC6122A417MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6122A417MR-G? A: The typical reset voltage threshold of XC6122A417MR-G is 4.17V.
Q: Can XC6122A417MR-G be used in battery-powered applications? A: Yes, XC6122A417MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6122A417MR-G have any built-in delay for the reset signal? A: Yes, XC6122A417MR-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6122A417MR-G suitable for automotive applications? A: Yes, XC6122A417MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Can XC6122A417MR-G be used in industrial control systems? A: Yes, XC6122A417MR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.
Q: Does XC6122A417MR-G have any additional features or protection mechanisms? A: Yes, XC6122A417MR-G has built-in overcurrent protection and reverse current blocking to safeguard against potential damage.
Q: What package does XC6122A417MR-G come in? A: XC6122A417MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided above are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6122A417MR-G.